Vizio D32hn-E4 User Manual

4Using the USB Media Player
Preparing Your USB Drive to Play USB Media
To display US media, you must rst save your photos onto a US
thumb drive:
• The US thumb drive must be formatted as FAT2.
• Files on the US thumb drive must end in a supported le
extension ( .jpg or .jpeg).
• The player is not designed to play media from external hard
drives, MP players, cameras, or smartphones
Displaying USB Media
To display your US media:
1. Connect your US thumb drive to the US port on the side of
the TV.
2. Use the Arrow buttons to highlight the Yes and press OK. (The
highlighted App is in the center of the dock.)
. Use the Arrow buttons to highlight the US drive from the list
and press OK.
. Use the Arrow buttons to highlight Photo and press OK.
5. Use the Arrow buttons to highlight the le you want to display.
Press OK. The photos display.
You can display your photos in fullscreen. Select the
photo, press OK, then highlight Fullscreen and press
OK.
Removing the USB Drive from the TV
To safely remove your US drive from the TV:
1. Turn o the TV.
2. Disconnect your US thumb drive from the US port on the
side of the TV.
Do not remove the US thumb drive while the TV is on.
Doing so may damage the drive.
Using the USB Media Player
The US Media Player allows you to connect a US thumb drive to
your TV to view photos
Note: The image shown here is for illustrative purposes only and may be subject to change.
The actual number of ports and their locations may vary, depending on the model.
36

Vizio D32hn-E4 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	32 \
Display brightness	- cd/m²
Display resolution	- pixels
Display technology	LED
Native aspect ratio	16:9
LED backlighting type	Full-Array
Supported video modes	720p
Contrast ratio (dynamic)	200000:1
Display number of colors	16.78 million colors
Display refresh rates supported	60 Hz
Number of OSD languages	3
On Screen Display (OSD)	Yes
On Screen Display (OSD) languages	ENG, ESP, FRE
Audio decoders	DTS TruSurround
RMS rated power	16 W
Number of speakers	2
3D	-
Battery type	AAA
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Remote control type	XRT020
Power consumption (standby)	0.5 W
Power consumption (typical)	24 W
Product color	Black
Panel mounting interface	100 x 100 mm
Package depth	136.9 mm
Package width	788.9 mm
Package height	508 mm
Package weight	6391.1 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	199.8 mm
Width (with stand)	729.7 mm
Height (with stand)	484.1 mm
Weight (with stand)	4699.2 g
Depth (without stand)	73.9 mm
Height (without stand)	434.3 mm
Weight (without stand)	4499.6 g