Vizio D40f-E1 Installation Guide

English - 9
Inserting and replacing batteries.
Two AAA batteries are included for you to use with
the basic remote control.
To insert/replace the batteries:
1. Find the notch on the back of the remote. Insert a
coin and pry open the back cover.
2. Remove the back cover and insert two AAA
batteries (included). Be sure to align the + and -
signs on the batteries and remote.
Visit http://support.vizio.com/ if you
have any questions.
1
2
When needed, VIZIO recommends
replacing the batteries that came with
this remote with two, new Duracell ‘AAA’
alkaline batteries.
WARNING: keep the remote control
batteries away from children. It may
cause choking and/or lead to a re or
chemical burn if mishandled. Do not
dispose of batteries in re. Replace only
with batteries of the correct type.
—
—
+
+

Vizio D40f-E1 Specifications

General

Screen Type	led
Wall Mount	200mm x 200mm
Features	full-array led backlight, vizio internet apps plus
Tuner	digital
Screen Size	39.96 inches, 40 inches
Refresh Rate	120hz
HDR	no
Built-In Speakers	yes
Surround Sound	dts trusurround
Speakers Output	20 watts
HDMI ARC Ports	yes
USB Ports	2
USB 2.0 Ports	0
RF Antenna	no
Bluetooth	no
Network	built-in wi-fi, ethernet
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	0
DVI	0
VGA Ports	0
SmartTV	chromecast
Remote Control	standard
3D	no
Power Consumption	70 kilowatt hours
Depth with Stand	8.3 inches
Height with Stand	23.5 inches
Width with Stand	36 inches
Net Weight with Stand	17.6 pounds
Depth without Stand	2.7 inches
Height without Stand	21.27 inches
Net Weight without Stand	17.2 pounds