Need help?Do you have a question about the Vizio E240AR and is the answer not in the manual?
General| Response time | 6.5 ms |
|---|---|
| Display diagonal | 24 \ |
| Display resolution | 1280 x 720 pixels |
| Native refresh rate | 60 Hz |
| LED backlighting type | Direct-lit LED |
| Supported video modes | 720p |
| Contrast ratio (typical) | 2000:1 |
| Display diagonal (metric) | 60.96 cm |
| Screen format adjustments | 16:9 |
| Supported graphics resolutions | 1280 x 720 (HD 720) |
| 3D | No |
| Analog signal format system | - |
| Audio system | SRS StudioSound / SRS TruSurround HD / SRS TruVolume |
| RMS rated power | 10 W |
| Number of speakers | 2 |
| DVI-D ports quantity | 0 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Image formats supported | JPG |
| Number of OSD languages | 3 |
| On Screen Display (OSD) languages | ENG, ESP, FRE |
| Product color | Black |
| Mercury content | 0 mg |
| Panel mounting interface | 100 x 100 mm |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 40 W |
| Sustainability certificates | ENERGY STAR |
| Certification | UL, CUL, FCC Class B, HDMI 1.4 incl. CEC/ARC, Vizio AQ, Vizio PQ, Dolby Digital, ENERGY STAR® 5.3, ATSC Spec A/65, EIA/CEA-766-A, California Energy Commission Auto Shut Down |
| Package depth | 124 mm |
| Package width | 711 mm |
| Package height | 442 mm |
| Package weight | 3620 g |
Weight and Dimensions| Depth (with stand) | 119 mm |
|---|---|
| Height (with stand) | 388 mm |
| Weight (with stand) | 2836 g |
| Depth (without stand) | 53 mm |
| Width (without stand) | 581 mm |
| Height (without stand) | 363 mm |
| Weight (without stand) | 2650 g |
Controls for turning the TV on/off, adjusting volume, navigating menus, and exiting screens.
Functions for changing channels, entering channel numbers, and selecting input sources.
Features like closed captions, USB media player control, and display mode adjustments.
Install batteries in the remote and connect the TV to a power outlet.
Connect your signal source and begin the on-screen setup wizard.
Set your time zone, daylight saving, and choose your TV signal type.
Perform a channel scan and exit the setup to begin watching TV.
Identification of various input and output ports on the back of the TV.
Description of AV, Component, and HDMI cable connections for optimal video and audio.
Information on how to get assistance with product setup, connections, and technical issues.
Solutions for problems like no picture, no sound, or no power.
Details regarding compliance with FCC rules for digital devices and radio frequency energy.
Notes on using approved power adapters and ensuring proper grounding for safety.
Information on one-year limited warranty for parts and labor, and service procedures.
Details on what is not covered, implied warranty limits, and personal data deletion.
To Next Page
