Vizio E240AR User Manual

FCC Class B Radio Interference Statement
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Notice
The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.
FCC warning
Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Caution
Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for each area.
USA: UL
Canada: CSA
Germany: VDE
UK: BASE/BS
Japan: Electric Appliance Control Act
LEGAL / COMPLIANCE

Vizio E240AR Specifications

General

Response time	6.5 ms
Display diagonal	24 \
Display resolution	1280 x 720 pixels
Native refresh rate	60 Hz
LED backlighting type	Direct-lit LED
Supported video modes	720p
Contrast ratio (typical)	2000:1
Display diagonal (metric)	60.96 cm
Screen format adjustments	16:9
Supported graphics resolutions	1280 x 720 (HD 720)
3D	No
Analog signal format system	-
Audio system	SRS StudioSound / SRS TruSurround HD / SRS TruVolume
RMS rated power	10 W
Number of speakers	2
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Image formats supported	JPG
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Black
Mercury content	0 mg
Panel mounting interface	100 x 100 mm
Power consumption (standby)	1 W
Power consumption (typical)	40 W
Sustainability certificates	ENERGY STAR
Certification	UL, CUL, FCC Class B, HDMI 1.4 incl. CEC/ARC, Vizio AQ, Vizio PQ, Dolby Digital, ENERGY STAR® 5.3, ATSC Spec A/65, EIA/CEA-766-A, California Energy Commission Auto Shut Down
Package depth	124 mm
Package width	711 mm
Package height	442 mm
Package weight	3620 g

Weight and Dimensions

Depth (with stand)	119 mm
Height (with stand)	388 mm
Weight (with stand)	2836 g
Depth (without stand)	53 mm
Width (without stand)	581 mm
Height (without stand)	363 mm
Weight (without stand)	2650 g