Need help?Do you have a question about the Vizio E220VA and is the answer not in the manual?
General| Display diagonal | 22 \ |
|---|---|
| Display brightness | 250 cd/m² |
| Supported video modes | 1080p |
| Viewing angle, vertical | 170 ° |
| Contrast ratio (dynamic) | 20000:1 |
| Screen format adjustments | 16:9 |
| Viewing angle, horizontal | 160 ° |
| Supported graphics resolutions | 1920 x 1080 (HD 1080) |
| 3D | No |
| Safety | UL, c-UL, FCC B |
| Backlight | Yes |
| Placement supported | Horizontal |
| Product color | Black |
| Panel mounting interface | 75 x 75 mm |
| Analog signal format system | - |
| Digital signal format system | ATSC |
| Audio system | SRS TruSurround HD |
| RMS rated power | 6 W |
| Number of speakers | 2 |
| HDMI version | 1.3a |
| USB 2.0 ports quantity | 1 |
| Image formats supported | JPG |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 22 W |
| Certification | ENERGY STAR 4.1 |
| Sustainability certificates | ENERGY STAR |
| Package depth | 149.86 mm |
| Package width | 622.3 mm |
| Package height | 434.34 mm |
| Package weight | 6124 g |
Weight and Dimensions| Depth (with stand) | 127 mm |
|---|---|
| Weight (with stand) | 3946 g |
| Depth (without stand) | 58.41 mm |
| Width (without stand) | 523.24 mm |
| Height (without stand) | 358.14 mm |
| Weight (without stand) | 3447 g |
Explains the function of each button on the remote control for operating the TV.
Connect your antenna or cable/satellite box to the coaxial port on the back of the TV.
Turn on the TV and navigate the initial setup wizard using the remote control.
Select your preferred language and input location (Home/Retail) during initial setup.
Select input source (Antenna/Cable) and perform a channel scan for setup.
Overview of HDMI, Component, and Composite AV ports available on the TV.
Diagrams showing how to connect devices using HDMI, Component, or Composite AV cables.
Solutions for 'no power', 'no sound', and 'low picture quality' issues.
Resolves issues with returning to setup, picture bars, remote response, 'no signal', and 'scan channels'.
To Next Page
