Vizio E32-C1 User Manual

TELEVISION ANTENNA CONNECTION
PROTECTION
If an outside antenna/satellite dish or cable system is to be
connected to the TV, make sure that the antenna or cable system
is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, size of the grounding conductors, location of
antenna discharge unit, connection to grounding electrodes, and
requirements of the grounding electrode.
Lightning Protection
For added protection of the TV during a lightning storm or when it
is left unattended or unused for long periods of time, unplug the TV
from the wall outlet and disconnect the antenna or cable system.
Power Lines
Do not locate the antenna near overhead light or power circuits, or
where it could fall into such power lines or circuits. Remember, the
screen of the coaxial cable is intended to be connected to earth in
the building installation.
Ground Clamp
Antenna Lead In Wire
Antenna Discharge Unit
(NEC Section 810-20)
Grounding Conductors
(NEC Section 810-21)
Ground Clamps
Power Service Grounding Electrode System
(NEC ART 250, part H)
Electric Service Equipment

Vizio E32-C1 Specifications

General

Screen Type	led
Wall Mount	100mm x 100mm
Tuner	digital
Screen Size	31.5 inches, 32 inches
Refresh Rate	120hz
Surround Sound	dts studio sound
Speakers Output	10 watts
Number Of Speakers	2
USB Ports	1
Network	built-in wi-fi
Headphones Output	no
Digital Optical Audio Outputs	1
Analog Audio Outputs	1
Component Video Inputs	1
Composite Video Inputs	1
DVI	0
Remote Control	smart
3D	no
Power Consumption	79 kilowatt hours
Depth with Stand	7.87 inches
Height with Stand	19.03 inches
Width with Stand	28.6 inches
Net Weight with Stand	11.79 pounds
Depth without Stand	2.55 inches
Height without Stand	17.06 inches
Net Weight without Stand	11.31 pounds