4
15
Completing the First-Time Setup
The first time you turn on the TV, the Setup App will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Use the Up/Down Arrow
buttons on the remote to
highlight your preferred
language and press OK.
3. Use the OK and Arrow Up/
Down buttons on the remote
to highlight Home mode Setup
and press OK.
4. Use the OK and Arrow Up/
Down buttons on the remote to
highlight your time zone and
press OK.
5. Use the OK and Arrow Up/
Down Buttons on the remote to
turn daylight saving time On or
Off.
6. Answer the on-screen questions
about your TV connection
using the Arrow and OK
buttons on the remote.
7. Use the Arrow buttons to
highlight Start the Channel
Scan and press OK.
8. When you have finished the channel scan, highlight Exit to
Live TV and press OK.
The First-Time Setup is complete.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
