EasyManuals Logo

Vizio E321VL User Manual

Vizio E321VL
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
VIZIO (32VL and E37VL User Manual
12
www.VIZIO.com
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If you choose to mount your HDTV on the wall, follow
the instructions below.
1. Write down the serial number located on the back of your HDTV in the space provided on page 1 to
have it handy if you need to call for support.
2. Remove the stand base and neck:
a. Disconnect the cables from your HDTV.
b. Place your HDTV face down on a soft,
flat surface to prevent damage to the
screen.
c. Remove the six (6) screws holding the
stand neck, and then remove the neck
and base.
Note: To remove the base from the neck, unscrew
thumbscrew on bottom.
3. Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount (sold
separately) using the mounting holes in
the back panel of your HDTV.
b. Read the instructions that came with
your specific wall mount to properly
hang your HDTV.
Wall Mounting Specifications
Screw Size M6
Screw Length 20.0 mm
Screw Pitch 1.0 mm
Hole Pattern
VESA standard 200 x 200 mm
spacing

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Vizio E321VL and is the answer not in the manual?

Vizio E321VL Specifications

General IconGeneral
Response time8 ms
Display diagonal32 \
Progressive scanNo
Display brightness500 cd/m²
Display resolution1366 x 768 pixels
Display technologyLCD
Supported video modes1080i, 480i, 480p, 720p
Contrast ratio (dynamic)100000:1
Display number of colors1.073 billion colors
Supported graphics resolutions1024 x 768 (XGA), 1920 x 1080 (HD 1080), 640 x 480 (VGA), 800 x 600 (SVGA)
CertificationCSA, CSA-US, FCC Class B
HDCPYes
RF ports quantity1
SCART ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Sustainability certificatesENERGY STAR
Product colorBlack
Panel mounting interface200 x 200 mm
Power consumption (typical)49 W
Power consumption (PowerSave)0.37 W
RMS rated power10 W
Analog signal format systemNTSC
Digital signal format systemATSC
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)210 mm
Width (with stand)792.23 mm
Height (with stand)570.2 mm
Weight (with stand)9900 g
Depth (without stand)89.4 mm
Height (without stand)565.9 mm
Weight (without stand)9360 g

Related product manuals