4
18
The first time you turn on the TV, the Setup app will guide you
through each of the steps necessary to get your TV ready for use.
Before you begin the first-time setup:
• Your TV should be installed and the power cord should
be connected to an electrical outlet.
• Your devices should be connected.
To complete the first-time setup:
1. Press the Power/Standby
button on the remote. The TV
powers on and the Setup App
starts.
2. Press the Right Arrow button on
the remote to highlight Home
Use, and then press OK.
3. Use the OK and Arrow
Up/Down buttons on the
remote to select your
language and country.
Completing the First-Time Setup
4. Use the OK and Arrow Up/
Down buttons on the remote to
highlight your time zone and
press OK.
5. Use the OK and Arrow Up/
Down Buttons on the remote
to set whether daylight saving
time applies in your locale.
When you are finished,
highlight Next and press OK.
6. Use the Arrow buttons on the
remote to highlight how your TV
is receiving signal and press OK.
Follow the on-screen
instructions to complete the
channel scan.
7. When you have finished the channel scan, highlight Exit to
Live TV and press OK.
The First-Time Setup is complete.
To Next Page
Loading...
Need help?
General
