5
23
Resetting the Color Temperature Settings
To reset the Color Temperature settings:
1. From the PICTURE menu, use the Arrow buttons to highlight
Advanced, and then press OK.
2. Use the Arrow buttons to highlight Color Temperature, and
then press OK. The COLOR TEMPERATURE menu is displayed.
3. Use the Arrow buttons to highlight Reset Color Temperature,
then press OK. The TV displays, “Select Reset to restore factory
default color temperature settings.”
4. Highlight Reset and press OK.
5. Press the EXIT button on the remote.
Adjusting the Advanced Picture Settings
To adjust the advanced picture settings:
1. From the PICTURE menu, use the
Arrow buttons on the remote to
highlight Advanced, then press OK.
2. Use the Arrow buttons on the
remote to highlight Advanced
Picture, then press OK. Th e
ADVANCED PICTURE menu is
displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow buttons to change
the setting:
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select Off, Low, Medium, or
High.
• Backlight Control - Dynamically improves the contrast
ratio of the picture by adjusting the backlight. The
adjustment is controlled by the content on the screen.
Select On or Off.
• Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
Off, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion
for mpeg files. Select Off, Low, Medium, or High.
• Film Mode - Optimizes the picture for watching film.
Select Auto or Off.
4. When you have finished adjusting the Advanced Picture
Settings, press the EXIT button on the remote.
To Next Page
Loading...
Need help?
General
