EasyManua.ls Logo

Vizio E470VLE - User Manual

Vizio E470VLE
44 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
E470VLE - user manual
47” LCD HDTV

Table of Contents

Other manuals for Vizio E470VLE

Preview: Quick Start Guide
Quick Start Guide16 pages

Questions and Answers

  • S
    Sheila GallagherAug 18, 2025
    Why is there no sound on my Vizio E470VLE LCD TV?
    • J
      Jeffery JoyceAug 18, 2025
      If there's no sound on your Vizio LCD TV, try these steps: First, press the Volume Up button on the remote. Then, make sure the MUTE button isn't activated. Check that the speakers are set to 'On' in the menu. Also, ensure headphones aren't plugged into the TV. Verify the audio connections of any external devices like Blu-ray players or cable boxes. If you're using an antenna, ensure it's securely connected and try moving it for a better signal.
  • M
    Michael SchwartzAug 20, 2025
    What to do if my Vizio E470VLE LCD TV displays “No Signal”?
    • M
      Michele AguirreAug 21, 2025
      If your Vizio LCD TV says “No Signal,” try these solutions: Begin by pressing the INPUT button on the remote to select a different input source. If that doesn't work, reset the picture settings. Also, check that all cables are securely attached. If you're using cable TV, satellite, or an antenna, try scanning for channels.
  • R
    Richard PattersonAug 23, 2025
    How to fix bad image quality on Vizio E470VLE LCD TV?
    • S
      Sarah HerreraAug 23, 2025
      To improve the image quality on your Vizio LCD TV, consider the following: For the best picture, use digital sources and high-definition programs, connecting your devices with HDMI cables. Check that all cables are securely attached and devices are correctly connected. You can also try adjusting the Brightness, Contrast, or Backlight settings. Additionally, try pressing the INPUT button on the remote to select a different input source.
  • K
    Kevin BrownAug 26, 2025
    What to do if the Vizio LCD TV remote buttons aren’t working?
    • C
      christinewilliamsAug 26, 2025
      If the remote buttons on your Vizio LCD TV aren't working, make sure you're pressing only one button at a time. Point the remote directly at the TV. If problems persist, replace the remote batteries with new ones.
  • M
    Mrs. Candace WalkerAug 28, 2025
    Why are the colors on my Vizio E470VLE not right?
    • L
      Lisa BranchAug 28, 2025
      If the colors on your Vizio LCD TV don’t look right, adjust the Color and Tint settings in the Picture menu.
  • T
    thomaspottsAug 30, 2025
    What to do if my Vizio LCD TV has no power?
    • D
      Dominique AndersonAug 30, 2025
      If your Vizio LCD TV has no power, first, ensure the TV is plugged into a working electrical outlet and that the power cable is securely attached to the TV. Then, press the Power/Standby button on the remote or the side of the TV to turn it on.
  • A
    Albert CarterSep 2, 2025
    Why is the picture distorted on my Vizio LCD TV?
    • T
      Teresa WarnerSep 2, 2025
      If the picture on your Vizio LCD TV is distorted, it might be due to nearby electrical devices interfering with the TV. Try separating the TV from electrical appliances, cars, or fluorescent lights. Also, ensure all cables are securely attached.
  • K
    Kelly HarrisSep 5, 2025
    Why do I see noise or static on my Vizio LCD TV screen?
    • A
      agarciaSep 5, 2025
      If you see 'noise' or static on your Vizio LCD TV screen, it could be because the TV's digital capabilities exceed the digital broadcast signal, causing the signal to be up-converted, which can sometimes cause irregularities. If you're using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
  • T
    Tiffany ArnoldSep 7, 2025
    Why does the image on my Vizio LCD TV not cover the entire screen?
    • W
      Wendy BarrySep 7, 2025
      If the display image on your Vizio LCD TV doesn't cover the entire screen: If you are in RGB mode (computer), ensure that H-Size and V-Position in the on-screen menu are set correctly. If you are using TV, AV1, AV2, or Component with 480i input, press the WIDE button on the remote to change the screen mode.
  • B
    Beth YoungSep 9, 2025
    Why does the volume change when I change input source on my Vizio LCD TV?
    • J
      Jason TateSep 10, 2025
      When you change the input source on your Vizio LCD TV and the volume changes, it's because the TV remembers the volume level on each input source. Use the Volume Up/Down buttons on the remote to adjust the volume.

Summary

Welcome

My Product Information

Section for entering TV model, serial number, and date of purchase for reference.

When Reading this Manual

Explanation of symbols used in the manual to alert users to important warnings or tips.

Important Safety Instructions

General Safety Precautions

Instructions for installation, use, and maintenance to prevent electric shock or fire.

Television Antenna Connection Protection

Lightning Protection

Measures to protect the TV during lightning storms or when unused for extended periods.

Power Lines

Guidance on avoiding proximity to overhead power lines or circuits.

DTV Transition Advisory

FCC Contact Information

Contact details for the Federal Communications Commission regarding digital TV transition.

NTIA Contact Information

Contact details for the National Telecommunications and Information Administration.

Troubleshooting & Technical Support

Troubleshooting Common Issues

Addresses common TV problems like no signal, no power, no image, no sound, color, remote, and image quality problems.

Installing the TV

Inspecting the Package Contents

Guidance on checking all items in the package are present and undamaged before installation.

Installing the TV Base

Step-by-step instructions for attaching the TV stand to the television.

Installing the TV on a Wall

Wall Mount Specifications

Details on screw sizes and hole patterns for wall mounting the TV.

Controls and Connections

Rear Panel Overview

Diagram and description of the various ports and connectors on the back of the TV.

Front Panel Overview

Diagram and description of the front panel controls and the remote control sensor.

Left Side Panel Controls

Remote Control Functions

Replacing the Remote Batteries

Connecting Your Devices

Connection Prerequisites

Steps to verify device video ports, TV ports, and necessary cables before connecting.

Connecting External Devices

General steps to connect external devices to the TV, including powering off and selecting input.

Completing the First-Time Setup

Initial TV Setup Wizard

Step-by-step guide through the TV's initial setup wizard for language, connection, and channel scanning.

Using the On-Screen Menu

Navigating the On-Screen Menu

Instructions on how to open, navigate, and exit the TV's on-screen menu system.

Changing the Input Source

Procedure to select the active input source for connected external devices.

Setting the Screen Aspect Ratio

Screen Aspect Ratio Modes

Explanation of Normal, Wide, Zoom, Panoramic, and Stretch modes for image display.

Changing the Screen Aspect Ratio

Adjusting Aspect Ratio

Step-by-step guide to adjust the TV's screen aspect ratio using the on-screen menu.

Setting Up Closed Captioning

Activating Closed Captions

Instructions to enable or disable closed captions for TV programs.

Changing Digital Closed Caption Appearance

Activating the Sleep Timer

Adjusting Picture Settings

Adjusting Advanced Picture Settings

Adjusting Color Temperature

Adjusting Picture Size and Position

Resetting Picture Settings

Adjusting Audio Settings

Adjusting Advanced Audio Settings

Resetting Audio Settings

Changing TV Settings

Setting the Tuner Mode

Procedure to set the TV tuner mode for antenna or cable connections.

Scanning for Channels

Steps to perform an automatic channel scan to detect available broadcast channels.

Adding New Channels

Skipping Channels

Changing Audio Language

Using Parental Controls

Accessing Parental Controls Menu

Steps to enter the parental controls menu using the default or custom passcode.

Enabling;Disabling Program Ratings

Locking and Unlocking Channels

Blocking Content by Rating

Changing Parental Control Passcode

Resetting Content Locks

Changing Input Names

Changing On-Screen Menu Language

Setting the Time Zone

Adjusting CEC Settings

Using the Help Menu

Displaying System Information

How to view a summary of the TV's current settings and configuration.

Resetting TV Settings

Procedure to reset picture and audio settings to factory defaults via the Help menu.

Restoring TV to Factory Default Settings

Using Guided Setup

Using the Digital Episode Guide

Using the Info Window

Using the USB Media Player

Connecting a USB Thumb Drive

Steps to connect a USB drive to the TV's USB port.

Playing USB Media

Guide to playing music or photos from a connected USB thumb drive.

USB Media Player - Music

USB Media Player - Photos

Troubleshooting & Technical Support

Common TV Problems

Addresses common TV problems like no signal, no power, no image, no sound, color, remote, and image quality problems.

Advanced Troubleshooting Issues

Picture Distortion and Quality

Troubleshooting for distorted pictures, incorrect aspect ratio, noise, and pixel issues.

Input-Related Issues

Explanation of volume and image size changes when switching input sources.

Specifications

Limited Warranty

Parts and Labor Coverage

Details on warranty coverage for replacement parts and labor during the warranty period.

Type of Service

Information on how to obtain warranty service, including shipping instructions.

Warranty Limitations and Exclusions

List of conditions and damages not covered by the VIZIO limited warranty.

Personal Data Protection

Advice on protecting personal information during warranty service.

Zero Bright Pixel Defect Guarantee

Information on the guarantee for zero bright pixels on select new product purchases.

Legal & Compliance

FCC Class B Radio Interference Statement

Information regarding FCC compliance for digital devices and potential interference.

Notice and Warnings

Important notices regarding modifications, shielded cables, and manufacturer responsibility.

FCC Warning

Cautionary note about modifications voiding user authority to operate equipment.

Cautionary Notes

General cautions regarding power adapters, grounding, and open source software.

Open Source Software Notice

Information about GPL/LGPL licenses and VIZIO's offer for source code.

Vizio E470VLE Specifications

General IconGeneral
Plug and PlayYes
Teletext functionNo
Audio formats supportedMP3
Image formats supportedJPG
Video formats supportedMPEG
Response time8 ms
Display diagonal47 \
Display technologyLCD
Supported video modes1080p
Contrast ratio (dynamic)100000:1
Display number of colors16.78 million colors
Supported graphics resolutions1920 x 1080 (HD 1080)
CertificationCSA, CSA-US, FCC Class B, HDMI V1.4 incl CEC, ARC, VIZIO PQA. VIZIO AQA
SCART ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out1
Product colorBlack
Panel mounting interface200 x 200 mm
Backlight typeCCFL
Power consumption (standby)1 W
Power consumption (typical)121 W
RMS rated power10 W
Tuner typeDigital
Digital signal format systemATSC
Weight and Dimensions IconWeight and Dimensions
Depth (without stand)264 mm
Width (without stand)1135 mm
Height (without stand)762 mm
Weight (without stand)19323 g

Related product manuals