Vizio E470VLE User Manual (English)

Other manuals for Vizio E470VLE

Questions and Answers:

S
Sheila GallagherAug 18, 2025
Why is there no sound on my Vizio E470VLE LCD TV?
- J
  Jeffery JoyceAug 18, 2025
  If there's no sound on your Vizio LCD TV, try these steps: First, press the Volume Up button on the remote. Then, make sure the MUTE button isn't activated. Check that the speakers are set to 'On' in the menu. Also, ensure headphones aren't plugged into the TV. Verify the audio connections of any external devices like Blu-ray players or cable boxes. If you're using an antenna, ensure it's securely connected and try moving it for a better signal.
M
Michael SchwartzAug 20, 2025
What to do if my Vizio E470VLE LCD TV displays “No Signal”?
- M
  Michele AguirreAug 21, 2025
  If your Vizio LCD TV says “No Signal,” try these solutions: Begin by pressing the INPUT button on the remote to select a different input source. If that doesn't work, reset the picture settings. Also, check that all cables are securely attached. If you're using cable TV, satellite, or an antenna, try scanning for channels.
R
Richard PattersonAug 23, 2025
How to fix bad image quality on Vizio E470VLE LCD TV?
- S
  Sarah HerreraAug 23, 2025
  To improve the image quality on your Vizio LCD TV, consider the following: For the best picture, use digital sources and high-definition programs, connecting your devices with HDMI cables. Check that all cables are securely attached and devices are correctly connected. You can also try adjusting the Brightness, Contrast, or Backlight settings. Additionally, try pressing the INPUT button on the remote to select a different input source.
K
Kevin BrownAug 26, 2025
What to do if the Vizio LCD TV remote buttons aren’t working?
- C
  christinewilliamsAug 26, 2025
  If the remote buttons on your Vizio LCD TV aren't working, make sure you're pressing only one button at a time. Point the remote directly at the TV. If problems persist, replace the remote batteries with new ones.
M
Mrs. Candace WalkerAug 28, 2025
Why are the colors on my Vizio E470VLE not right?
- L
  Lisa BranchAug 28, 2025
  If the colors on your Vizio LCD TV don’t look right, adjust the Color and Tint settings in the Picture menu.
T
thomaspottsAug 30, 2025
What to do if my Vizio LCD TV has no power?
- D
  Dominique AndersonAug 30, 2025
  If your Vizio LCD TV has no power, first, ensure the TV is plugged into a working electrical outlet and that the power cable is securely attached to the TV. Then, press the Power/Standby button on the remote or the side of the TV to turn it on.
A
Albert CarterSep 2, 2025
Why is the picture distorted on my Vizio LCD TV?
- T
  Teresa WarnerSep 2, 2025
  If the picture on your Vizio LCD TV is distorted, it might be due to nearby electrical devices interfering with the TV. Try separating the TV from electrical appliances, cars, or fluorescent lights. Also, ensure all cables are securely attached.
K
Kelly HarrisSep 5, 2025
Why do I see noise or static on my Vizio LCD TV screen?
- A
  agarciaSep 5, 2025
  If you see 'noise' or static on your Vizio LCD TV screen, it could be because the TV's digital capabilities exceed the digital broadcast signal, causing the signal to be up-converted, which can sometimes cause irregularities. If you're using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal.
T
Tiffany ArnoldSep 7, 2025
Why does the image on my Vizio LCD TV not cover the entire screen?
- W
  Wendy BarrySep 7, 2025
  If the display image on your Vizio LCD TV doesn't cover the entire screen: If you are in RGB mode (computer), ensure that H-Size and V-Position in the on-screen menu are set correctly. If you are using TV, AV1, AV2, or Component with 480i input, press the WIDE button on the remote to change the screen mode.
B
Beth YoungSep 9, 2025
Why does the volume change when I change input source on my Vizio LCD TV?
- J
  Jason TateSep 10, 2025
  When you change the input source on your Vizio LCD TV and the volume changes, it's because the TV remembers the volume level on each input source. Use the Volume Up/Down buttons on the remote to adjust the volume.

Vizio E470VLE Specifications

General

Plug and Play	Yes
Teletext function	No
Audio formats supported	MP3
Image formats supported	JPG
Video formats supported	MPEG
Response time	8 ms
Display diagonal	47 \
Display technology	LCD
Supported video modes	1080p
Contrast ratio (dynamic)	100000:1
Display number of colors	16.78 million colors
Supported graphics resolutions	1920 x 1080 (HD 1080)
Certification	CSA, CSA-US, FCC Class B, HDMI V1.4 incl CEC, ARC, VIZIO PQA. VIZIO AQA
SCART ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Digital audio optical out	1
Product color	Black
Panel mounting interface	200 x 200 mm
Backlight type	CCFL
Power consumption (standby)	1 W
Power consumption (typical)	121 W
RMS rated power	10 W
Tuner type	Digital
Digital signal format system	ATSC