5
22
Setting the Auto Power Off Feature
To help save energy, your TV is set by default to turn off after 10
minutes if no signal is being displayed on the screen. This feature
can be deactivated.
To set the Auto Power Off feature:
1. From the Sleep Timer menu, use the Up/Down Arrow buttons
on the remote to highlight Auto Power Off and press OK. Th e
Auto Power-Off menu is displayed.
2. Highlight Off or 10 min and press OK. Press Exit.
aDjuSting the piCture SettingS
Your TV display can be adjusted to suit your preferences and
viewing conditions.
To adjust the picture settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight the Picture
icon and press OK. The Picture
Settings menu is displayed.
3. Use the Up/Down Arrow
buttons on the remote to
highlight Picture and press OK.
The Picture Settings menu is
displayed.
4. Use the Arrow buttons on the
remote to highlight Picture
Mode, then use the Left/Right
Arrow buttons to change the
picture mode:
• Standard mode sets the
various picture settings to
values that will produce
the best picture in the
most cases. This is the
recommended setting.
• Movie mode sets the picture settings to values perfect for
watching a movie in a dark room.
• Game mode optimizes the picture settings for displaying
game console output.
• Vivid mode sets the picture settings to values that
produce a brighter, more vivid picture.
To Next Page
Loading...
Need help?
General
