3
Note: The images shown here are for illustrative purposes only and may be subject to change. The actual on-screen image and text may vary, depending on the model.
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press OK.
2. Use the Arrow buttons to
highlight the setting you wish to
adjust, then press the Left/Right
Arrow buttons to change
the setting:
• Color Temperature -
See
Adjusting the Color
Temperature.
• Black Detail - Adjusts the
average brightness of the
picture to compensate for
large areas of brightness.
Select O, Low, Medium, or
High.
• Active LED Zones - Dynamically improves the contrast ratio
of the picture by adjusting the backlight. The adjustment is
controlled by the content on the screen. Select On or O.
• Motion Control - Adjusts motion related features (not on
all models)
• Reduce Judder - Activates Smooth Motion motion
estimation/motion compensation, which suppresses motion
judder, or “stuttering” of the image when the camera moves
across a scene horizontally. As the setting increases, judder
is reduced.
• Reduce Motion Blur - Increases frame rate to reduce
motion blur of 60 hertz video. As the setting increases,
motion blur is reduced.
• Clear Action - Reduces blue in scenes with fast action.
Some sensitive viewers may notice ickering. Select On or
O.
• Reduce Signal Noise - Diminishes artifacts in the image
caused by the digitizing of image motion content. Select
O, Low, Medium, or High.
• Reduce Block Noise - Reduces pixelation and distortion for
mpeg les. Select O, Low, Medium, or High.
• Game Low Latency - Select On to reduce video delay (lag)
when gaming.
• Pure Cinema Mode - Optimizes the picture for watching
lm. Select Auto or O.
• Color Space
‡
- Select Color Space for the source. Video
sources uses YCbCr, but PC uses RGB.
• Gamma - Set the shape of the Gamma curve. Use lower
Gamma values for bright room conditions, and higher
values when it’s dark.
3. When you have nished adjusting More Picture Settings, press the
EXIT button on the remote.
Adjusting the Color Temperature
Adjusting the color temperature changes the white balance of the
picture.
To adjust the color temperature:
1. From the MORE PICTURE menu,
use the Arrow buttons to
highlight Color Temperature,
and then press OK.
2. Use the Arrow buttons on the
remote to highlight a color
temperature preset and then
press OK.
• Normal is optimized for
television viewing.
• Cool produces a blue-hued
picture.
• Computer optimizes the picture for use as a PC monitor.
• When you have nished adjusting the color temperature,
press the EXIT button on the remote.
More Picture
Color Temperature Normal
Black Detail Off
Active LED Zones On
Motion Control
Clear Action Off
Reduce Noise
Game Low Latency Off
Pure Cinema Auto
Color Space Auto
Gamma 2.1
Back
Color Temperature
Normal
Cool
Computer
Back
‡
Only available on HDMI inputs.
14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
