Vizio E75-E3 User Manual

A
The remote is not responding.
• Make sure the batteries are properly inserted matching
the - and + symbols.
• Replace the batteries with fresh ones.
There is no power.
• Ensure the Display is plugged into a working electrical
outlet.
• Ensure the power cable is securely attached to the
Display.
• Press the Power/Standby button on the remote or on the
back of the Display to turn the Display on.
The power is on, but there is no image on the screen.
• Ensure all cables are securely attached to the Display.
• Ensure all devices are connected correctly. Devices dier;
see your device’s user manual for details.
• Adjust Brightness, Contrast, or Backlight. See Adjusting
the Picture Settings .
• Press the INPUT button on the remote to select a
dierent input source.
There is no sound.
• Press Volume Up on the remote control.
• Press the MUTE button on the remote to ensure mute is o.
• Check the audio settings. See Adjusting the Audio Settings.
• Check the audio connections of external devices (Blu-ray
player, game console, cable/satellite box) that are
connected to the Display.
The sound is at or dialog is not audible.
• Turn o Volume Leveling. See Adjusting the Audio
Settings .
The colors on the Display don’t look right.
• Adjust the Color and Tint settings in the Picture menu. See
Adjusting the Picture Settings .
• Select a pre-set picture mode. See Adjusting the Picture
Settings . VIZIO recommends selecting Calibrated.
• Check all cables to ensure they are securely attached.
The buttons on the remote aren’t working.
• Ensure you are only pressing one button at a time.
• Point the remote directly at the Display when pressing a
button.
• Replace the remote batteries with new ones. See
Replacing the Batteries.
The image quality is not good.
• For the best image quality, view high-denition programs
using digital sources. Connect your devices with HDMI
cables.
The picture is distorted.
• Move the Display away from electrical appliances, cars,
and uorescent lights.
• Ensure all cables are securely attached.
The display image does not cover the entire screen.
• If you are using Display, AV, or Component with 480i
input, press the button on the remote to change the
screen mode.
The Display has pixels (dots) that are always dark.
• Your Display is precision-manufactured using an
extremely high level of technology. However, sometimes
pixels may not display correctly. These types of
occurrences are inherent to this type of product and do
not constitute a defective product.
HELP TOPICS
32

Vizio E75-E3 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	75 \
Display brightness	- cd/m²
Display technology	LED
Native aspect ratio	16:9
Native refresh rate	120 Hz
LED backlighting type	Full-Array
Contrast ratio (dynamic)	5000000:1
Viewing angle, horizontal	176 °
Motion interpolation technology	Clear Action
3D	-
Battery type	AAA
Number of batteries supported	2
Dimming type	Active LED Zones® x14
Processor cores	8
High Dynamic Range (HDR) technology	High Dynamic Range (HDR) 1000
Wi-Fi standards	Wi-Fi 5 (802.11ac)
Bluetooth version	4.1
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	1
Audio decoders	DTS, DTS Studio Sound, DTS TruSurround, DTS TruVolume
RMS rated power	10 W
Power consumption (standby)	0.5 W
Power consumption (typical)	210 W
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Panel mounting interface	400 x 400 mm
Remote control type	XRT135
Package type	Box
Package depth	180 mm
Package width	1800 mm
Package height	1070 mm
Package weight	39100 g

Weight and Dimensions

Depth (with stand)	381 mm
Height (with stand)	1020 mm
Weight (with stand)	28600 g
Depth (without stand)	51 mm
Width (without stand)	1680 mm
Height (without stand)	970 mm
Weight (without stand)	28150 g