4
Turning the Power Indicator On or O
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light
to be on.
To turn the Power Indicator Light on or o:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Highlight Power Indicator and press OK.
4. Use the Up/Down Arrow buttons to select On or O, then
press OK.
Adjusting the CEC Settings
The CEC function on your TV enables you to control HDMI-connected
devices with the included remote without any additional
programming.
Not all HDMI devices support CEC. See your device’s
user manual for details.
To enable, disable, or adjust CEC settings:
1. Press the MENU button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and
press OK. The SYSTEM menu is displayed.
3. Use the Arrow buttons on the remote to highlight CEC and
press OK. The CEC menu is displayed.
4. Use the Arrow and OK buttons to adjust each setting:
• CEC - Select Enable to use the TV remote to control CEC
devices connected to HDMI. Select ARC Only for plug and
play of an audio device connected to the HDMI ARC input.
The ARC setting does not support video devices connected
to the audio device (Select Enable to enable support for
these devices).
Select Disable to turn CEC o.
• Device Discovery - Use this function to determine if your
device is connected and supports CEC. (Required for Enable
option only)
5. Press the EXIT button on the remote.
46
To Next Page
Loading...
Need help?
General
