Why do I see noise on my Vizio HDTV screen?
When your Vizio Plasma TV's digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV’s display capabilities, which can cause noise or trash on the screen.
What to do if my Vizio P42 says no input signal?
If your Vizio Plasma TV shows a 'No Input Signal' message, first ensure the signal cable is correctly connected. Then, verify that the connected devices are powered on. Finally, confirm that the selected input option on your TV matches the actual input signal being used.
Why is my Vizio P42 remote not working?
If your Vizio Plasma TV's remote control isn't working, ensure the batteries are correctly inserted with the right polarity. If that doesn't work, try replacing the batteries with new ones. Make sure you're within the remote's operating range and pointing it directly at the remote control window on the TV, without any obstructions in the way.
What to do if my Vizio P42 has sound but no picture?
If your Vizio Plasma TV has audio but no video signal, try turning the main power switch off for 5 seconds, and then back on. After that, turn the TV on again using either the remote control or the power button located on the front of the TV.
Vizio Plasma TV power light is on but no picture, what should I do?
If your Vizio Plasma TV's power indicator is green but there's no video or audio, try turning the main power switch off for 5 seconds and then back on. Then, turn the Plasma TV back on using the remote control or the power button on the front of the TV.
General| Screen Size | 42 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1024 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| Viewing Angle | 178 degrees |
| Speakers | 2 x 10W |
| Refresh Rate | 600 Hz |
| Inputs | HDMI, Component, Composite, RF |
To Next Page
