Vizio VW32L HDTV40A - 4.3 Troubleshooting Guide

vzzso“ vwazz. Hon/40A Uscr Mama!
.:;..3 “B”:'*;:::..z£:.r2.a-5'-"'awz:3%rir2::§ if:‘iL.s§da=
If the TV fans or the performance changes dramaticaiiy, check the dismay in accordance with the
fonowing instructions. Remembervto check the peripherais to pinpoint the source of the faiiure. if the
display stiéi faiis to perform as expected. contact the V120 for assistance by caning 1«(877) 698—4946'cr
e-mas! us at Lfihgggwrflvizigggm.
j Make sure the power button is ON (White V1230 Logo}.
Make sure AC power cord is secureiy connected to the AC socket
= Plug another eiectricai device ( like a radio} to the power outlet to verify that the
outlet is supmying the prcpe: voftage,
Check your audio connection
Press MUTE on the remcze controi, so that mute symboi disappears from the screen
: Check your audio settings, your TV audio may be set 10 SAP, min or speakers off. '
.‘ Press the Votume + (Up) key on your remote control
: Make sure that headphones are not ccnnected
if the screen is black.
Power Is ON but nc screen
7 image.
Check your input connecsions.
’‘ Make sure the videc cable supplied with the TV is secured to the correct video
output port on the back of the VCR and the TV. Makc any cab§e you have attached
to the TV is secured tocihe correct, output your Set-Top Box, DVD. etc.
V Adjust brightness and contrast.
; Check Source settings.
I: if any cojors (rad, gneen, or bag) are missing, check the videc came to make sure it
i is securafy connected.
Wrong or abnormai colcrs
appmr.
Conlroi butzcns do not work.
Remote Central does not
work.
V Press omy one button at a time.
T Make sure batterfes are inserted oorrectiy
Batteries caowd. be weak.
1 For best image quafity, view HO wide screen programs where possible. If HD
; content is nct avaiSabIe.v§ew “sxandard Definition” fmm a digital source. Standard,
‘ analog TV wit! always be noticeably inferior to H0 because your diglra! flat pane! TV
has video that is many times better than okzi TV’s and so you can see interference
gand deficiencies you did not know you had.
T Make sure that the power cord is plugged into a grounded electrical cutter.
Make sure that the poweributtcn is turned on.
. Makesure that the sétected input scurce is connected to awcrkéng énput scarce.
I if your TV is connected to your compute: in RG8 or HUM! mode. press any key on
~ V youriceyboard to “wake” your computer.
There appears to be Smage
‘quaiity issues.
YCVU cannot see 3 picture.
.3 You may be getting interference from eiecmca! apptiances, cars, motorcycles, or
fiucrescem Sights. If you have not mounted it on the wait, tgy mcvimg your TV to V
; another location to see M1335 is the caused the problem.
» Make sure that the input source, cabie is attached securely ‘am cortectiy to the back >
T of your TV. ‘
Make sure that the video input source is within the range: of your TV. Compare the
‘ videc input sourcés specifications with your TV specifications.
‘7if you are using RG3 mode, make sure that H Size and V Position in the On Screen
V .1 Dismay {O80} are set conectty.
You see a disnorted jaiieture or
hear smusuai sound.
The pictwée has atmorma:
patterns.
The dispiay image dces mt»
cover the 'e:'3ti_re screen.
Version 811 8.2008 66
www.V!Zl0.com' ‘
VIZ687 0011400