How to fix no sound on Vizio HDTV?
If your Vizio HDTV has no sound, try these steps: * Check your audio connections to ensure they are secure. * Press the MUTE button on the remote to disable mute. * Review your audio settings to ensure the TV audio isn't set to SAP, minimum, or speakers off. * Increase the volume by pressing the Volume + button on your remote. * Ensure headphones are not connected to the TV.
What to do if you cannot see a picture on Vizio VW42L HDTV?
If you cannot see a picture on your Vizio HDTV, ensure that the power cord is plugged into a grounded electrical outlet and that the power button is turned on. Verify that the selected input source is connected to a working input source. If your TV is connected to your computer in RGB or HDMI mode, press any key on your keyboard to wake your computer.
Why is my Vizio VW42L on but no picture?
If your Vizio HDTV has power but no screen image, ensure the video cable supplied with the TV is securely connected to the correct video output port on the back of the VCR and the TV. Also, check that any cable attached to the TV is securely connected to the correct output on your Set-Top Box, DVD player, etc. Adjust the brightness and contrast settings, and verify the Source settings.
How to adjust screen size on Vizio VW42L HDTV?
If the display image on your Vizio HDTV does not cover the entire screen and you are using RGB mode, ensure that H Size and V Position in the On Screen Display (OSD) are set correctly. If you are using TV, AV-C, AV-S, or Component with 480i input, use the WIDE button on the remote control to scroll through various screen modes.
How to troubleshoot no power on Vizio VW42L HDTV?
To troubleshoot a Vizio HDTV that won't power on, first, ensure the power button is set to ON, indicated by a white VIZIO logo. Next, verify that the AC power cord is securely connected to the AC socket. To confirm the outlet is functioning correctly, plug another electrical device, such as a radio, into the same outlet to check if it supplies the proper voltage.
Why can I see picture but not hear sound on Vizio VW42L HDTV?
If you can see a picture on your Vizio HDTV but cannot hear sound, make sure that the volume is not turned down and that the sound is not muted. Also, check that your audio input source cables are connected securely and correctly.
Why does my Vizio HDTV have dark or colored pixels?
Pixel defects within industry specifications are inherent to this type of product and do not constitute a defective product.
Why do I see noise or trash on my Vizio HDTV screen?
When your Vizio LCD HDTV's digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV’s display capabilities. This up-converting can cause noise or trash on the screen.
Why does the volume change when I switch inputs on my Vizio VW42L?
Your Vizio HDTV remembers the volume level from the last time you adjusted it. If the sound level is higher or lower from another source, then the loudness will change when you switch inputs.
General| Screen Size | 42 inches |
|---|---|
| Display Type | LCD |
| HDMI Ports | 2 |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Speakers | 2 x 10W |
| Resolution | 1366 x 768 |
| Viewing Angle | 178° |
| Inputs | HDMI, Component, Composite, VGA, RF |
| Power Consumption | 200W |
To Next Page
