To Next PageTo Next PageWhy is my Vizio HDTV remote control not working?
If your Vizio HDTV remote isn't working, first ensure the batteries are correctly inserted and not weak. Also, make sure you have selected 'TV' mode on the remote.
What to do if the screen is black on Vizio LCD TV?
If the screen of your Vizio LCD TV is black, check your input connections to ensure they are properly configured.
How to fix no sound on Vizio HDTV?
If there's no sound on your Vizio HDTV, check your audio connections and ensure they are secure. Press the MUTE button on the remote to make sure the TV isn't muted. Verify your audio settings, as the TV audio might be set to SAP, minimum volume, or speakers off. Increase the volume using the Volume + button on the remote. Also, ensure that headphones are not connected.
What to do if my Vizio VX37L has power but no screen?
If your Vizio HDTV has power but no screen image, ensure the video cable is securely connected to the correct video output port on both the VCR (if applicable) and the TV. Also, check that any cables connected to your Set-Top Box, DVD player, etc., are securely connected to the correct output. Adjust the brightness and contrast settings, and verify the Source settings.
Why does my Vizio HDTV have no power?
If your Vizio HDTV has no power, ensure the power button is ON (Green LED). Verify the AC power cord is securely connected to the AC socket. Test the power outlet with another electrical device to confirm it's supplying the proper voltage.
Why does my Vizio VX37L have dark or colored pixels?
Your LCD Vizio HDTV is manufactured using high-precision technology; however, some pixels may not display correctly. Pixel defects within industry specifications are inherent and do not constitute a defective product.
Why do I see noise on my Vizio LCD TV screen?
If you notice 'noise' or 'trash' on the screen of your Vizio LCD HDTV, it's likely due to up-converting. When your LCD HDTV’s digital capabilities exceed a digital broadcast signal, the signal is increased to match your TV’s display capabilities, which can result in such artifacts.
Why does the volume change when I switch inputs on my Vizio LCD TV?
When using different inputs on your Vizio LCD TV, the volume may change because the TV remembers the volume level from the last time you adjusted it for each input. Therefore, if the sound level is higher or lower from another source, the loudness will change accordingly.
Why is there no sound on my Vizio LCD TV?
If there's no sound coming from your Vizio LCD TV, first, check your audio connections. Ensure the mute function is off by pressing the MUTE button on the remote until the mute symbol disappears. Review your audio settings to confirm the TV audio isn't set to SAP, minimum volume, or speakers off. Increase the volume by pressing the Volume + (Up) key on your remote. Also, make sure headphones are disconnected.
Why does screen size change when I switch inputs on my Vizio HDTV?
If you switch to a different input on your Vizio HDTV and the screen size changes, it's because the TV remembers the viewing mode from the last time you used that particular input (AV1, AV2, Component 1, Component 2, HDMI 1, HDMI 2 and TV).
General| Screen Size | 37 inches |
|---|---|
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178° |
| Refresh Rate | 60 Hz |
| Speakers | 2 x 10W |
| Inputs | HDMI, Component, Composite, RF, VGA |
Observe safety rules for installation, use, and maintenance to prevent electric shock or fire.
Details on grounding antenna and cable systems for protection against surges and static charges.
Description of physical buttons on the TV for operation.
Identifies and explains the connectors on the left side of the TV's rear panel.
Details the connectors on the right side of the TV's rear panel.
Explanation of each button's function on the VIZIO universal remote control.
Details advanced remote functions like screen format, sleep timer, and input selection.
Explains remote functions for Picture-In-Picture and picture adjustments.
Instructions for installing batteries and information on the remote's effective operating range.
Guide to selecting the best video connection for various devices.
Steps to connect a DVD player using an HDMI cable for optimal digital video and audio.
Guide for connecting an HDTV set-top box using HDMI for optimal HD viewing.
Initial steps to power on the TV and connect it to a signal source.
Completing the initial setup for language, tuner mode, and channel scanning.
How to select TV, HDMI, or Component inputs for viewing content.
Navigating the OSD menus for picture, audio, and other advanced settings.
Choosing Picture Modes like Custom, Standard, Movie, or Game for DTV/TV input.
Adjusting the backlight level to control the overall brilliance of the picture.
Guide to diagnosing and resolving common issues like no power, no sound, or picture problems.
