Vizio VX37L User Manual

VIZIO VX37L HDTV User Manual
Version 8/23/2006 27
www.VIZIOCE.com
2.6 Connecting Coaxial (RF)
2.6.1 Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your antenna
or digital cable (out-of-the-wall, not from the Cable
Box) to the DTV/TV CABLE/ANTENNA connector at
the rear of the LCD HDTV.
3. Turn on the power to the LCD HDTV.
4. Select DTV using the INPUT button on the remote or
side of the LCD HDTV, or directly by pressing the TV
button on the Remote Control.
Note:
a) Not all digital TV broadcasts are High Definition (HD). Refer to the program guides, or
consult your cable, satellite or TV station operator.
b) Digital broadcasts are not available in all areas. Refer to www.antennaweb.org
for detailed
information.
c) Make sure the antenna and coaxial cable are correctly grounded.
d) For Professional antenna installation contact VIZIO at www.VIZIOCE.com
or call 1-888-
VIZIOCE (1-888-849-4623).

Vizio VX37L Specifications

General

Screen Size	37 inches
Resolution	1366 x 768
Aspect Ratio	16:9
HDMI Ports	2
Brightness	500 cd/m²
Response Time	8 ms
Viewing Angle	178°
Refresh Rate	60 Hz
Speakers	2 x 10W
Inputs	HDMI, Component, Composite, RF, VGA