What to do if I cannot see a picture on Vizio LCD TV?
If you cannot see a picture on your Vizio LCD TV, ensure that the power cord is properly plugged into a grounded electrical outlet and that the power button is turned on. Verify that the selected input source is correctly connected to a working input source. If your TV is connected to your computer via RGB or HDMI, press any key on your keyboard to wake your computer.
What to do if the screen is black on Vizio LCD TV?
If the screen of your Vizio LCD TV is black, check your input connections to ensure they are properly configured.
How to fix no sound on Vizio HDTV?
If there's no sound on your Vizio HDTV, check your audio connections and ensure they are secure. Press the MUTE button on the remote to make sure the TV isn't muted. Verify your audio settings, as the TV audio might be set to SAP, minimum volume, or speakers off. Increase the volume using the Volume + button on the remote. Also, ensure that headphones are not connected.
What to do if my Vizio VX37L has power but no screen?
If your Vizio HDTV has power but no screen image, ensure the video cable is securely connected to the correct video output port on both the VCR (if applicable) and the TV. Also, check that any cables connected to your Set-Top Box, DVD player, etc., are securely connected to the correct output. Adjust the brightness and contrast settings, and verify the Source settings.
Why can't I see a picture on my Vizio HDTV?
If you cannot see a picture on your Vizio HDTV, ensure that the power cord is plugged into a grounded electrical outlet and that the power button is turned on. Verify that the selected input source is connected to a working device. If your TV is connected to your computer in RGB or HDMI mode, press any key on your keyboard to wake your computer.
Why does the screen size change when I switch inputs on my Vizio LCD TV?
When you switch to a different input on your Vizio LCD TV and the screen size changes, it's because the TV remembers the viewing mode you last used for that particular input (AV, Component, HDMI, and TV).
Why do I see noise on my Vizio LCD TV screen?
If you notice 'noise' or 'trash' on the screen of your Vizio LCD HDTV, it's likely due to up-converting. When your LCD HDTV’s digital capabilities exceed a digital broadcast signal, the signal is increased to match your TV’s display capabilities, which can result in such artifacts.
Why does the volume change when I switch inputs on my Vizio LCD TV?
When using different inputs on your Vizio LCD TV, the volume may change because the TV remembers the volume level from the last time you adjusted it for each input. Therefore, if the sound level is higher or lower from another source, the loudness will change accordingly.
Why is there no sound on my Vizio LCD TV?
If there's no sound coming from your Vizio LCD TV, first, check your audio connections. Ensure the mute function is off by pressing the MUTE button on the remote until the mute symbol disappears. Review your audio settings to confirm the TV audio isn't set to SAP, minimum volume, or speakers off. Increase the volume by pressing the Volume + (Up) key on your remote. Also, make sure headphones are disconnected.
Why does screen size change when I switch inputs on my Vizio HDTV?
If you switch to a different input on your Vizio HDTV and the screen size changes, it's because the TV remembers the viewing mode from the last time you used that particular input (AV1, AV2, Component 1, Component 2, HDMI 1, HDMI 2 and TV).
General| Screen Size | 37 inches |
|---|---|
| Resolution | 1366 x 768 |
| Aspect Ratio | 16:9 |
| HDMI Ports | 2 |
| Brightness | 500 cd/m² |
| Response Time | 8 ms |
| Viewing Angle | 178° |
| Refresh Rate | 60 Hz |
| Speakers | 2 x 10W |
| Inputs | HDMI, Component, Composite, RF, VGA |
To Next Page
