To Next PageTo Next PageWhat to do if my Vizio HDTV has no power?
If your Vizio HDTV has no power, ensure that the power button is turned ON, indicated by a white VIZIO logo. Verify that the AC power cord is securely connected to the AC socket. To confirm that the power outlet is supplying the correct voltage, plug in another electrical device, such as a radio.
What to do if my Vizio HDTV30A VW32L remote control does not work?
If your Vizio HDTV remote control isn't working, first ensure that the batteries are inserted correctly. If they are, the batteries might be weak and need replacing.
What to do if my Vizio HDTV power is on but there is no screen image?
If your Vizio HDTV's power is on but there's no screen image, ensure the video cable supplied with the TV is securely connected to the correct video output port on both the TV and the VCR. Check that any cables connected to your Set-Top Box, DVD player, or other devices are also securely connected to the correct output. Adjust the brightness and contrast settings and check the Source settings.
Why do I see a distorted picture or hear unusual sound on my Vizio HDTV?
If you are experiencing a distorted picture or unusual sound on your Vizio HDTV, it may be due to interference from electrical appliances, cars, motorcycles, or fluorescent lights. Try moving your TV to another location to see if that resolves the issue, especially if it's not wall-mounted.
Why can I see a picture but cannot hear sound on my Vizio HDTV30A VW32L?
If you can see a picture but cannot hear sound on your Vizio HDTV, first ensure that the volume is not turned down. Also, make sure that the sound is not muted. Finally, check that your audio input source cables are securely and correctly connected.
Why does the screen size change when I switch inputs on my Vizio HDTV30A VW32L HDTV?
Your Vizio HDTV remembers the viewing mode from the last time you used a particular input (AV, Component, HDMI, and TV). This is why the screen size might change when you switch between different inputs.
Why do I see 'noise' or 'trash' on the screen of my Vizio HDTV30A VW32L HDTV?
When your Vizio LCD HDTV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (increased) to match your TV’s display capabilities. This up-converting process can sometimes cause noise or trash to appear on the screen.
Why does the display image not cover the entire screen on my Vizio HDTV?
If the display image does not cover the entire screen on your Vizio HDTV, and you are using RGB mode, ensure that H Size and V Position in the On Screen Display (OSD) are set correctly. If you are using TV, AV-C, AV-S or Component with 480i input, follow steps on page 33 on how to set the WIDE screen modes.
Why does the volume change when I switch inputs on my Vizio HDTV?
Your Vizio HDTV remembers the volume level from the last time you adjusted it on each input. Therefore, if the sound level is higher or lower from another source, the loudness will change when you switch inputs.
General| Screen Size | 32 inches |
|---|---|
| Aspect Ratio | 16:9 |
| Contrast Ratio | 1000:1 |
| Response Time | 8ms |
| Viewing Angle | 178° |
| Power Consumption | 150W |
| Brightness | 500 cd/m2 |
| Inputs | HDMI, Component, Composite, VGA, RF |
| Speakers | 2 x 10W |
Product safety standards and testing requirements.
Grounding, lightning, and power line safety for antennas.
Unpacking, checking contents, and initial handling.
Instructions for removing the stand base for wall mounting.
Initial setup, language selection, and channel tuning.
Description of physical buttons on the TV.
Identification and function of all input/output jacks.
Usage, battery, range, and handling precautions.
Guide to HDMI, Component, AV, RF, and RGB inputs.
Connect antenna/cable directly or via VCR.
Via HDMI, DVI, and Component.
Via Composite or Coaxial.
Via various inputs including HDMI and Component.
Using S-Video and audio.
Using optical audio output.
Via RGB and audio.
Supported PC resolutions for optimal display.
Selecting sources and changing channels.
Volume, channel, and screen size adjustments.
Navigating OSD menus for picture and audio.
Covers Picture Mode, Backlight, Brightness, Contrast, Color, Tint, Sharpness, Color Temp, Advanced Video settings.
Covers Volume, Bass, Treble, Balance, Surround, Digital Audio Out, Speakers, Lip Sync.
Configures Tuner Mode, Auto Search, Skip Channel, MTS, Time Zone, Daylight Saving.
Sets Language, Sleep Timer, Wide mode, Input Naming, Closed Caption, and Resets settings.
Manages Channel Block, TV/Movie ratings, and password.
Adjusts Picture, Audio, and Setup for HDMI input.
Adjusts Picture, Audio, and Setup for Component/AV inputs.
Adjusts Picture, Audio, and Setup for PC input.
Explains Normal, Wide, and Panoramic display modes.
Cleaning the TV and remote.
Solutions for common TV problems.
Phone and email for assistance.
Radio interference compliance for Class B devices.
Technical details of the TV.
Explanations of technical terms.
Alphabetical topic reference.
