Vizio VX37L - Using Your Antenna or Cable for TV; Using the Antenna or Cable through Your VCR

VIZIO VX37L HDTV User Manual
Version 8/23/2006 28
www.VIZIOCE.com
2.6.2 Using Your Antenna or Cable for TV
1. Turn off the power to the LCD HDTV.
2. Connect the coaxial (RF) connector from your antenna
or cable (out-of-the-wall, not from the Cable Box) to the
DTV/TV CABLE/ANTENNA connector at the rear of the
LCD HDTV
3. Turn on the power to the LCD HDTV.
4. Select TV using the INPUT button on the remote or
side of the LCD HDTV, or directly by pressing the TV
button on the Remote Control.
2.6.3 Using the Antenna or Cable through your VCR
1. Turn off the power to the LCD HDTV and VCR.
2. Connect the “Output to TV”, “RF Out” or “Antenna Out”
connector on the rear of your VCR to the DTV/TV
CABLE/ANTENNA connector at the rear of the LCD
HDTV.
3. Turn on the power to the LCD HDTV and VCR.
4. Select TV using the INPUT button on the remote or
side of the LCD HDTV, or directly by pressing the TV
button on the Remote Control.
Note: If you have an off-air antenna or cable TV, connect it to the “Antenna In” connector on the rear of
your VCR.