puteS
Programming for TV, STB, DVD, AUDIO, DVR,
HD, CD and AUX
Note: TV mode can be programmed for TV
codes ONLY. STB and DVD mode can be
programmed to control ANY kind of device
listed in the code list. The remote is
pre-programmed to operate VIZIO TVs under TV
mode and VIZIO Blu-Ray Players under DVD
mode.
1. Manually turn on your TV (or device you want
2. Press the TV (or device) button and hold for
5 seconds until the LED flashes twice. LED will
remain lit.
3. Find the programming code for your TV (or
device) in the code list and enter it using the
Number Buttons. The LED flashes once after
entering each digit. If the code is accepted,
the LED flashes twice after the last digit is
and then turns off.
If the code is invalid, the LED will have a long blink
and then turns off. Please repeat Steps 2 and 3
with the next code listed for the component and
manufacturer.
4. Point the remote control at the TV (or device)
and press the POWER button. The TV (or
device) should turn off.
Note:
•
If your TV (or device) does not respond, try all
the codes for your brand. If the codes do not
work, or your brand is not listed, see “Using the
smart search function, page 7.”
•
Sometimes a code listed will only include limited
functions. Try other codes that may include
more functionality.
6
to control).
To Next Page
Loading...
Need help?
General
