Vjoycar TK05 - Command Setting List Summary

Default alert phone number is registered master number, and it can be
changed as needed.
!
SMS: *lowbat* +1XXXXXXXXXXXX*, (For instance, master controller
phone number is +1XXXXXXXXXXXX. +1 refers to the country code.
XXXXXXXXXXXX is the cellphone number. Please make sure country code is
included, and digit 0 is not needed before cell phone number)
!
!
!
As a reminder, the LED light will stop flashing and remains on as a constant
during low battery period.
!
!
!
Command Setting List
Function
Command
Description
APN Setting
*apn*AXXX*BXXX*CXXX*
This command sets the
telecom Access Point
Name. BXXX refers to
user name, CXXX refers
to password.
Master Setting
*master*123456*
+1XXXXXXXXXXXX*
+1 refers to the country
code. XXXXXXXXXXXX is
the cellphone number.
Please make sure country
code is included, and 0 is
not needed before cell
phone number
Password Changing
*password*654321*
Original password is
default as 123456.
654321 refers to new
password.
Vibration Sensitivity
Setting
*sensitive*1-5*
1 being the most
sensitive, 5 the least.
Default setting is 1.