The online command function enables device to connect with server for 15
minutes, and user will be able to send online command from the tracking
website.
!
!
SMS：*onlineon*
Device Response: “Notice: System has enabled online control function.
Data will be uploaded every 30 seconds for 15 minutes.”
SMS：*onlineoff*
Device Response: “Notice: System has disabled online control function.”
!
!
10. Deep Sleep
!
The Deep Sleep function enables the device to be available for long working
periods as needed, tracking remotely when either the timer wakes the unit or
motion is detected.
!
10.1 Sleep
!
Device will enter deep sleep in appointed time interval and will be
awake for 12 minute to upload 1 GPS location. If no new command，
call or new motion is received during the 12 minutes, device will enter
sleep function again.
!
SMS: *sleep*1-99* (1-99 represents hours of deep sleep period. )!
Device Response: “Notice: System is going to enter deep sleep function,
data will be uploaded every XXX hours.” !
!
10.2 Motion Sleep
Device will enter deep sleep and will be awaked by motion, meanwhile upload
the current location, and will wait for 12 minutes for further command. I If no
new command，call or new motion is received during the 12 minutes, device
will enter sleep function again. And the circle repeats.
!
10.2.1 SMS: *sleepv* !
!
Device Response: “Notice: System has enabled deep sleep with motion call
alert function.” !
!
10.3 Period Motion Sleep!
Device will enter deep sleep for appointed time period and will be
awaked by motion, meanwhile upload the current location, and will
wait for 12 minutes for further command. If no new command，call or
new motion is received during the 12 minutes, device will enter sleep
function again, until appointed period ends. Please input time period.!
!
To Next Page
Loading...