VKAR Bison - Shock and Suspension Assembly; Shock Assembly Steps; Suspension Arms Installation Notes

1.Fill shock body with 4/5 silicone fluid(purchase seperately),pump the shock shaft
up and down to remove any air bubbles.
2.Wait the air bubbles pumped out,then pull down the shock shaft to the bottom,fill
the silicone fluid up to 2 mm,after that ,tighten the shock head 1.
3.Install the spring,shock assembling finished.
Shock Aaaembling Steps:
FRONT
REAR
13
12
13
22
23
7
7
12
1
3
2
16
11
9
10
10
3
11
15
24
19
18
5
9
43
13
61
61
44
28
43
13
41
28
41
Shock Assembly
Suspension Arms Assembly
NOTE:Pay attention to choose
the right hole when installing