x
17
R40 User manual
DISPLAY FUNCTION
1 Gear = ECO (minimum speed and higher range)
2 Gear = STD (medium speed and range)
3 Gear = TURBO (maximum speed and limited range)
Error code = displays error messages (for any error codes,
please contact the service center)
Trip / Odo = shows the driven distance after switching on or
the driven distance in total
ATTENTION: The battery level is indicated by 5 bars. Each bar represents
about 20% of the charge. If the display shows only one bar, we recommend
to fully charge the scooter immediately and not to continue the ride.
On / Off Key = with the on / off key you switch the device on and off
Up key = with the up key you shift up a gear
Down key = with the down key you shift down a gear
Set key = the set key takes you to the basic settings,
please do not change them! These are intended
exclusively for the service personnel of the
service center
To Next Page
Loading...
