VMware 4817V62 - vSphere - PC - Page 127

7 Run the VMware Tools tar installer.
cd vmware-tools-distrib
./vmware-install.pl
Respond to the configuration questions on the screen. Press Enter to accept the default values.
8 Log off of the root account.
exit
What to do next
Verify the status of VMware Tools by checking the VMware Tools label on the virtual machine Summary tab.
The VMware Tools label should display the word OK.
Install VMware Tools on a NetWare Guest
Install or upgrade VMware Tools to the latest version to enhance the performance of the virtual machine’s
guest operating system and improve virtual machine management.
Before you upgrade VMware Tools on a virtual machine, determine the status of VMware Tools. To do this,
select the virtual machine and click the Summary tab. The VMware Tools label indicates whether VMware
Tools is installed and current, installed and not current, or not installed.
Prerequisites
n
A supported guest operating system must be installed on the virtual machine.
n
You must have an ESX/ESXi license or be using evaluation mode to power on the virtual machine.
Procedure
1 From the vSphere Client, right-click the virtual machine, select Power, and select Power On.
2 Click the Console tab to make sure that the guest operating system starts successfully, and log in if
necessary.
3 Right-click the virtual machine, select Guest, and select Install/Upgrade VMware Tools.
4 Select Interactive Tools Installation and click OK.
This step initiates the installation process by mounting the VMware Tools bundle on the guest operating
system.
5 In the virtual machine console, load the CD-ROM driver so the CD-ROM device mounts the ISO image
as a volume. To open the Netware Server Console, select Novell > Utilities > Server Console.
6 Do one of the following:
n
In the NetWare 6.5 Server Console, enter: LOAD CDDVD.
n
In the NetWare 6.0 or NetWare 5.1 Server Console, enter: LOAD CD9660.NSS.
7 In the Server Console, enter the following command.
vmwtools:\setup.ncf
When the installation finishes, the message VMware Tools for NetWare are now running appears in the Logger
Screen (NetWare 6.5 and NetWare 6.0 guests) or the Console Screen (NetWare 5.1 guests).
What to do next
Verify the status of VMware Tools by checking the VMware Tools label on the virtual machine Summary tab.
The VMware Tools label should display the word OK.
Chapter 11 Creating Virtual Machines
VMware, Inc. 127