EasyManua.ls Logo

VMware 4817V62 - vSphere - PC - Managing Alarms

VMware 4817V62 - vSphere - PC
364 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alarm Settings – Reporting
In the Alarm Settings dialog box, use the Reporting tab to define a tolerance range and trigger frequency for
condition or state triggers. Reporting further restricts when the trigger occurs.
Procedure
1 If necessary, display the Reporting tab of the Alarm Settings dialog box.
a Display the object in the Inventory panel.
b Select the object and press Ctrl-M to open the Alarm Settings dialog box.
c Click the Reporting tab.
2 Enter a Tolerance.
A 0 value triggers and clears the alarm at the threshold point you configured. A non-zero value triggers
the alarm only after the condition reaches an additional percentage above or below the threshold point.
Condition threshold + Reporting Tolerance = trigger alarm
Tolerance values ensure you do not transition alarm states based on false changes in a condition.
3 Select a Frequency.
The frequency sets the time period during which a triggered alarm is not reported again. When the time
period has elapsed, the alarm will report again if the condition or state is still true.
4 Click OK.
Managing Alarms
You can change alarms, disable alarms, reset alarms, and acknowledge triggered alarms. In addition, you can
export a list of alarms to a file.
To manage alarms the vSphere Client must be connected to a vCenter Server system.
Acknowledge Triggered Alarms
Acknowledging a triggered alarm suppresses the alarm actions from occurring. It does not reset the alarm to
a normal state.
Required privilege: Alarm.Alarm Acknowledge
Procedure
1 Display the inventory panel.
2 If necessary, select View > Status Bar to display the status pane.
3 In the status bar, click Alarms to display the Triggered Alarms panel.
4 Right-click the alarm and select Acknowledge Alarm.
5 (Optional) To acknowledge multiple alarms at one time, shift-click each alarm to select it, right-click the
selection, and select Acknowledge Alarm.
Change Alarm Attributes
You can rename alarms and change alarm triggers, reporting, and actions.
Required privilege: Alarm.Modify Alarm
vSphere Basic System Administration
252 VMware, Inc.

Table of Contents

Related product manuals