EN
During a conversation, handset volume can be
amplified by pressing the red Handset volume
Boost key (9). Press again will turn off the boost
function. If boost is triggered, the boost key LED will
be on.
Handset Volume amplification
Then go to “SOS number” to set your SOS num-
bers (up to 5 numbers) or “Call center number” to
set your emergency service number.
Next go to set “SOS message” You can edit this
message. During SOS dialing progress, this
message will be sent to your SOS number.
In order to void pickup by voice machine, CP140
will broadcast a voice message, prompting the
SOS call receiver to press “0”. This voice mes-
sage can be changed at > SOS > Set outgoing
SOS voice message
If you want to add one or more SOS bracelets,
you can go to “Pairing Settings”
If SOS mode is Set Call Centre, voice message
in step 4 can be disable by Press-zero-key
prompt > Off
2.
3.
4.
5.
6.
P.13