VOCOlinc VAP1 - Surface and Component Cleaning

The PureFlow surface should be cleaned
depending on the air quality of the room.
Use a clean, dry cloth to wipe the external
surfaces of the PureFlow, or use a damp
cloth to remove stubborn stains and dirty
buildup if necessary. Avoid commercial
cleaning products which may damage the
unit's surface.
Clean the air outlet with a soft brush.
Remove the filter covers. Use a clean,
dry cloth to wipe the external surfaces
of the PureFlow, or use a damp cloth to
remove stubborn stains and dirty
buildup if necessary. Avoid commercial
cleaning products which may damage
the unit's surface.
Caution: Be careful not to drop the
brush into the PureFlow.