Need help?Do you have a question about the VocoPro KJ-7808RV and is the answer not in the manual?
General| Type | Karaoke System |
|---|---|
| Echo Control | Yes |
| Key Control | Yes |
| Weight | 12 lbs |
| Video Output | 1 RCA |
Expresses gratitude and provides VocoPro contact information for support.
Section for recording model, serial, and purchase details.
Guidelines for FCC compliance, unit modifications, and interference.
Essential warnings for safe operation, placement, and handling.
Advice on power, cleaning, lightning protection, and signal interference.
Guidance on setting safe volume levels to prevent hearing damage.
Information on common and dangerous sound levels.
Explanation of symbols and core safety instructions.
Precautions for setup, operation, cleaning, and servicing.
Lists the main functional features of the KJ-7808RV mixer.
Instructions for securely mounting the unit in a 19" rack.
Explains the path of signals through the karaoke system.
Illustrates connecting various components in a typical system.
Step-by-step guide for connecting external vocal effects.
Details on mic/line inputs, aux send, and level controls.
Explanation of gain, EQ, and DSP effects for mic channels.
Controls for selecting audio sources and video modes.
How to route video signals to main and monitor outputs.
Interpreting output meters and adjusting master output levels.
Operation of the graphic EQ, cueing, and headphone controls.
Adjusting mic master level and reverb amount.
Customizing echo effects and using the hiss filter.
Power connection and main audio outputs.
Jacks for recording, AV connections, and external audio sources.
Dedicated inputs for CD players and turntables.
Adjusting unit voltage and mitigating ground loop hum.
Video connections and SEND/RETURN for mic effects.
How to select and route video signals.
Adjusting the musical key to match vocal range.
How to assign key control to specific mic or stereo channels.
Controlling key changes remotely via a microphone.
Adjusting echo level, repeat, and delay for desired effect.
Adjusting reverb and overall DSP effect intensity per channel.
Using features to manipulate vocals with Multiplex media.
Using talk over for announcements with mic activity.
Using the 5-band graphic EQ for precise room tuning.
Monitoring input signals through headphones for mixing.
Assigning mic channels to the external effects loop.
Controlling signal levels for the effects loop.
Cueing master output and mixing/crossfading audio sources.
Connecting to a recording device via the RECORD OUT jacks.
Solutions for lack of sound or video from the unit.
Troubleshooting vocal features and crossfader problems.
Resolving issues with headphone cueing and insert channels.
Fixing problems with echo application and microphone feedback.
Details on input/output, tone controls, and signal-to-noise ratio.
Technical details for DSP reverb, echo delay, and hiss filter.
To Next Page
