Vogelsang VX Q Series

Need help?

Do you have a question about the Vogelsang VX Q Series and is the answer not in the manual?

Summary

General Information for Operation & Maintenance

Pump Operation Description

Explains how the Vogelsang positive displacement rotary lobe pump functions.

Pump Identification

Details how to find and read the pump's identification label.

Installation, Maintenance, Calibration & Repair

Installation Guidelines

Crucial recommendations for system design and pump installation.

Equipment Alignment

Procedures for ensuring proper alignment of pump and drive units.

Special Rigging & Handling

Guidelines for safely lifting and handling pump/motor assemblies.

Safety

General Safety Advisories

Important safety instructions and warnings for pump operation and maintenance.

Lubrication

Lubrication Points & Reservoirs

Identifies the buffer chamber and gearbox as lubrication points.

Changing the Oil

Details procedures and schedules for changing gear and buffer chamber oil.

Lubrication Chart

Provides lubricant specifications and quantities for VX Q Series pumps.

Operational Startup & Testing

Test Procedures

Outlines performance test levels and standards for rotary pumps.

NPIPR and Cavitation

Defines NPIPR and its importance in preventing pump cavitation.

Maintenance

Preventative Maintenance Schedule

Details inspection and adjustment tasks based on operating hours.

Corrective Maintenance Procedures

Covers buffer chamber depressurization, seal replacement, and lobe installation.

Gearbox Maintenance Procedures

Details steps for disassembling and reassembling the pump's gearbox.

Troubleshooting & Warranties

Troubleshooting Common Issues

Table listing common operational problems and their remedies.

Limited Warranty Information

Outlines the terms and conditions of the product warranty.