Need help?Do you have a question about the Vogt AM Series and is the answer not in the manual?
General| Brand | Vogt |
|---|---|
| Model | AM Series |
| Category | Water Pump |
| Language | English |
Defines WARNING, CAUTION, and NOTE terms used in the manual for safety.
Provides essential safety rules for operating the pumping equipment and general precautions.
Specifies requirements for personnel responsible for operating and maintaining the equipment.
Details risks associated with improper use, non-compliance, and unauthorized modifications.
Lists and identifies the primary components of the pumping equipment with a diagram.
Explains the information presented on the pump's identification plate.
Introduces the AM Series centrifugal pumps with sectional cutting views and parts details.
Provides guidelines and warnings for safely transporting and handling the heavy pumping equipment.
Describes the factory packaging methods and protections used for AM Series pumps.
Outlines instructions for storing the pumping equipment to maintain its condition.
Details the procedures and checks required after storing the pumping equipment.
Instructions for inspecting the pump upon arrival for damage or missing parts.
General guidelines for selecting an appropriate location and environment for pump installation.
Specifies the acceptable mounting positions for AM Series pumps.
Describes requirements for foundations to ensure sturdy and non-vibrating installation.
Details the use of anchor bolts for securing the pump base to the foundation and tightening torques.
Explains how to connect piping to the pump without introducing stresses.
Explains the purpose and function of expansion joints in the piping system connected to the pump.
Lists recommended steps to take before commissioning the pump.
Details the procedure for priming the pump before starting to avoid dry running.
Provides guidance on minimum flow rates based on fluid temperature.
Discusses the impact of fluid density on pump power requirements.
Outlines checks for the electric motor's electrical connection and specifications.
Covers engine specifications, insulation, protection, and direction of rotation checks.
Provides advice on throttling suction and handling stalled pumps.
Explains how to verify and ensure the correct direction of motor rotation.
Details connection methods for three-phase electric motors, including delta and star connections.
Emphasizes the importance of adequate and periodic maintenance for performance and lifespan.
Discusses engine lubrication requirements, especially for motors over 50 HP.
Advises on checking voltage, amperage, and internal components of the electric motor.
Describes the standard mechanical seals used and their components.
Outlines rules for qualified personnel, warranty eligibility, and general precautions before assembly/disassembly.
Provides general notes on pump disassembly and photographic sequences.
Provides guidelines and a sequence for assembling the pump.
Presents visual views of AM Series pump parts for various models.
Presents exploded views and parts lists for AM Series pumps, models 701 & 751.
Lists possible causes and solutions for insufficient pump flow rate.
Lists possible causes and solutions for insufficient discharge pressure.
Identifies causes and solutions for motor overload conditions.
Lists possible causes and solutions for abnormal vibrations in the pumping equipment.
Provides causes and solutions for pump breakdowns occurring after initial start-up.
To Next Page
