Need help?Do you have a question about the Vogt TUBE-ICE 10TA and is the answer not in the manual?
Highlights safety information for experienced personnel working with refrigeration and electrical equipment.
Details safety measures and procedures for qualified persons handling refrigerant charging.
Explains the meaning of DANGER, WARNING, and CAUTION symbols used in the manual.
Instructions for checking the machine for damage and handling any suspected issues.
Specifies suitable location requirements and environmental conditions for the machine.
Details required water supply and drain connection sizes and recommendations.
Explains how to check phase rotation and voltage unbalance for proper operation.
Provides essential instructions for installing air-cooled condensers to ensure reliable operation.
Describes the basic operational cycle of the ice machine.
Details the process of ice formation within the freezer tubes.
Describes the process of ice release and discharge from the freezer.
A checklist of essential steps to perform before initial machine start-up.
Step-by-step guide for the initial start-up process of the ice machine.
Instructions for adding refrigerant, including safety precautions and procedures.
Identifies and describes standard components found on the control panel.
Provides the control circuit electrical schematic for all voltages (50-60 Hz).
Detailed steps for cleaning the ice-making section of the machine.
Instructions for sanitizing the ice machine components and system.
Guidance on checking operation, cleaning, and draining water-cooled condensers.
Recommends a systematic maintenance program for long-term machine life.
Lists possible causes and remedies for the machine failing to start or run.
Addresses causes and solutions for the machine freezing up unexpectedly.
Identifies factors affecting ice quality and provides corrective actions.
Explains reasons for reduced ice production and how to resolve them.
Diagnoses and resolves issues related to high head pressure in air-cooled systems.
Explains the function and adjustment of the petcock for blowdown.
Details the high-low pressure switch, its protection role, and adjustment settings.
Lists common causes of compressor motor burnout and preventive measures.
Step-by-step guide to transfer refrigerant from the freezer to the receiver.
Provides instructions for removing and replacing key machine components.
Details the Power Monitor unit, its display, and parameter adjustments.
Explains features and programmability of the PLC for enhanced machine control.
Lists essential spare parts for the Vogt Model P18FXT Tube-Ice Machine.
To Next Page
General