Vogtec Mobex T Series User Manual

7 /13
Configuring via phone user interface
Account Settings: Press the Menu s oft key when t he phone is idle, select
Advanced Enter password ( Default no 123) Accounts t o configure the account
Note:
For more information on account parameters, refer to Configuring via web user
interface above.
Basic Call features
Placing a Call
Enter the number in idle, and then press
】 key.
Direct IP Call
Enter the IP address in idle(star
【 * 】 key as the point ), and press 】 key.
For example:The IP address is 192.168.0.8, enter 192*168*0*8 in idle, and press the
【 】 key.
Answering a Call
Press
】 key in the incoming call.
Note:You can reject an incoming call by pressing the Reject sot key
】 key.
Ending a Call Press
【 】 key.
Redial
P r ess 【 】 key to enter the calls list, press 【 】 or 【 】 to select the
desired
entry, and then
】 .
Call Mute and Un-mute
Press 【 】 to mute the microphone during a call.
Press 【 】 again to un-mute the call.
Call Hold and Resume
To place a call on hold:
Press Option soft key to expand the submenu options and select Hold feature during
an active call.
To resume the call, do one of the following:
Press Option soft key to expand the submenu options and select Resume feature
during an active call.

Vogtec Mobex T Series Specifications

General

Brand	Vogtec
Model	Mobex T Series
Category	IP Phone
Language	English