4
CHARGING THE EARPHONES
SWITCHING ON THE EARPHONES
PAIRING WITH EACH OTHER
• Please ensure that the battery is fully charged before using the device for the
first time.
• Place the earphones into the charging case. A red light will turn on when the
charging has begun. The red light will turn off when the charging is complete.
Note:
• When the battery level is low and only 5 minutes of playtime is left, you will hear a
warning voice message.
• The earphones will turn off when inserted into the charging case, even if they are
powered ON before charging.
• To switch on the device, press and hold the Multi-Function Button for about
3 seconds.
• To switch off the device, press and hold the Multi-Function Button for about 3
seconds until the LED light turns off, you will then hear a voice prompt stating that
the earphones have been powered off.
Note: Please note that the earphones would need to be turned on individually.
Turn on both earphones at the same time, after powering on the earphones, wait a
couple of seconds and you will hear the earphones pair to each other.
Note: This can be done separately to use earphones individually.
To Next Page
Loading...
Need help?
General
