Volcano CORE Mobile User Manual (English)

Questions and Answers:

J
Jordan GibbsSep 8, 2025
What does it mean when Volcano CORE Mobile displays 'Flow is not ChromaFlo detected'?
- T
  teresaleonSep 9, 2025
  The velocity sensitivity of the ChromaFlo technique is between 4 cm/sec and 7 cm/sec, depending on the attenuating tissue between the transducer and the region of flow. Flow below this velocity will appear as black. Carefully identify and compare the lumenal boundary based on grayscale images with those obtained from ChromaFlo images, as well as other modalities such as angiography.
M
Micheal HaydenAug 23, 2025
What to do if Volcano CORE Mobile displays 'No Paper or Ink'?
- S
  Stephanie ReynoldsAug 23, 2025
  The printer is out of paper or ink. Replenish the paper or ink.
K
Katherine PatelAug 25, 2025
What to do if my Volcano Mouse says 'Catheter Failure'?
- M
  Margaret RoblesAug 26, 2025
  The catheter is drawing too much current from the patient interface module. Replace the catheter.
K
Katherine YoungAug 27, 2025
What to do if Volcano CORE Mobile displays 'No Catheter'?
- D
  dylanconnerAug 27, 2025
  The patient interface module does not have a catheter plugged in. Plug in a catheter.
R
Rachel RuizAug 27, 2025
What to do if Volcano CORE Mobile displays 'PIM Power Failure'?
- M
  Michael HopkinsAug 27, 2025
  The PIM has detected an undesirable high power condition for the catheter in use. Replace the catheter. If the message persists, contact Technical Support.
T
tramosAug 29, 2025
What to do if Volcano CORE Mobile Mouse displays 'Error starting video loop recording'?
- R
  regina88Aug 29, 2025
  The hard drive may be full. Archive cases and delete them from the hard drive, then try to record the video loop again. If the problem persists, call Technical Support.
C
Charlotte BlakeSep 14, 2025
What to do if Volcano CORE Mobile Mouse displays 'Error: Invalid DICOM file'?
- B
  Brooke HarrisSep 14, 2025
  The DICOM file on the DVD could not be read, most likely due to a dirty or damaged DVD. Try cleaning the DVD and ensure the archived case is a Volcano-system case.
J
Jacqueline WilsonSep 10, 2025
What to do if Volcano Mouse displays 'Please modify the search criteria and query again or increase the maximum number of worklist'?
- J
  Janet AdamsSep 10, 2025
  An incorrect query has been entered. Re-enter the corrected query.
J
Jacob CummingsSep 7, 2025
What to do if Volcano CORE Mobile Mouse displays 'Invalid Segment Specified'?
- A
  audrey29Sep 7, 2025
  Target Assist does not work with VH video loops with only one frame. Create another VH video loop with more than one frame and try Target Assist again. If the problem persists, call Technical Support.
P
Paul MoralesSep 4, 2025
What to do if Volcano CORE Mobile Mouse displays 'Retrieve from DVD failed'?
- J
  John FritzSep 4, 2025
  There is a problem with the DVD or the DVD drive. Try retrieving a patient case from another DVD. If that fails, please contact Technical Support. If it works, then the DVD previously used was damaged.

Volcano CORE Mobile Specifications

General

Brand	Volcano
Model	CORE Mobile
Category	Mouse
Language	English

Summary

Patents and Trademarks

Patents

Information regarding patents associated with the system.

Trademarks

Details on trademarks used by the system.

Warnings and Precautions

General System Use Cautions

Essential safety guidelines for operating the Volcano system.

PIM and Catheter Cautions

Important safety notes for using the Patient Interface Module and catheters.

Chapter 1: Overview

Introduction and Indications

Explains the purpose and applications of the Volcano system.

Contraindications and Adverse Reactions

Details system's intended uses, contraindications, and potential side effects.

Chapter 2: System Description

System Components Overview

Introduces the main hardware components of the Volcano system.

Monitor and Control Console Features

Describes the display monitor and control console functions.

Patient Interface Module and Options

Details the PIM, compatible catheters, and available system options.

Chapter 3: System Setup

System Initialization and Software Settings

Guides through turning on the system and configuring software defaults.

Key Configuration Tabs

Explains essential settings within System, Image, and Archive tabs.

Chapter 4: Preparing for a Case

Initial System Setup and Checks

Outlines steps for preparing the system before each IVUS case.

Connecting Peripherals and Patient Data

Details connecting the PIM, catheter, and entering patient information.

Chapter 5: Acquiring IVUS Images

Inserting and Adjusting the Catheter for Imaging

Describes inserting the catheter and adjusting image parameters.

Image Display Features (VH, ChromaFlo, Ringdown)

Explains using VH, ChromaFlo, and Ringdown features for image enhancement.

Chapter 6: Recording IVUS Images

Recording Video Loops

Provides instructions for capturing video loops during IVUS procedures.

Saving Frames

Explains how to save single image frames from live or recorded data.

Chapter 7: Reviewing IVUS Images

Navigating and Displaying Images

Covers accessing and viewing saved frames and video loops.

Video Loop Playback and Features

Details playback controls, rapid review, and bookmarking within video loops.

ILD Display and Rotation

Explains the In-Line Digital display and rotating the tomographic view.

Chapter 8: Making Measurements and Annotations

Measuring Vessel Diameter and Area

Guides on performing diameter and area measurements on IVUS images.

Annotating Frames and Percent Difference

Explains adding annotations and calculating percent difference.

Chapter 9: Using VH IVUS

Overview and Activation of VH Display

Introduces VH IVUS for tissue classification and how to activate it.

VH Display and Border Editing

Covers using the VH display screen and editing borders.

Chapter 10: Using the ChromaFlo Feature

Overview and Activation of ChromaFlo

Explains the ChromaFlo feature for visualizing blood flow.

Sensitivity and Region of Interest Settings

Details adjusting ChromaFlo sensitivity and defining the region of interest.

Chapter 11: Ending an IVUS Case

Ending and Saving a Case

Describes the process of concluding an IVUS case and saving data.

Deleting a Case

Provides instructions for removing completed cases from the system.

Chapter 12: Archiving an IVUS Case

Archiving Options and DICOM Storage

Covers methods for archiving cases, including DVD and DICOM.

Chapter 13: Switching Modes

Entering Patient Information and Switching Modalities

Explains entering patient data and switching between system modes.

Chapter 14: Retrieving and Deleting an IVUS Case

Retrieving and Deleting Cases from Storage

Guides on how to retrieve and delete IVUS cases from the system.

Removing System Power

Instructions for safely powering down and unplugging the system.

Chapter 15: Image Export Option

Image Export Functionality and Status

Explains the Image Export feature for transferring IVUS data.

Chapter 16: Troubleshooting

Message Alerts and Error Resolutions

Lists common system messages and their corresponding solutions.

Potential Imaging Artifacts and Causes

Discusses common artifacts, their causes, and resolution methods.

Chapter 17: Maintenance

Service and Maintenance Frequency

Outlines required service intervals and user-performed maintenance tasks.

User-Performed Maintenance Procedures

Details cleaning, disinfecting, and PC cooling maintenance.

Chapter 18: Technical Specifications

Imaging Catheter and Video Specifications

Lists technical details for imaging catheters and video display.

Power, EMC, and Safety Standards

Details electrical, EMC, and safety compliance information for the system.

Performance, Acoustic Outputs, and Accuracy

Provides essential performance metrics, acoustic outputs, and measurement accuracy.

Volcano CORE Mobile User Manual

Table of Contents