Page 86 of 148 300004969171/B
Chapter 11: Ending an IVUS Case
Overview
An open case exists after the patient information and/or image data is collected. Once the
case is complete, you must end the case before starting a new one. Ending a case is
equivalent to saving the case to the system’s hard drive. Alternatively, you may choose
to delete the case.
NOTE: If power is shut off before ending a case, restart the system. When the system
restarts, the End Case screen displays allowing data from the last patient to be confirmed
or modified, and the case to be ended.
Ending a Case
To end the current case, do the following:
1 Press the End Case tab. The End Case screen displays with the current patient data
in the fields.
Figure 49: End Case Screen
To Next Page
Loading...