What to do if Volfoni EDGE™ RF 3D Glasses are not synchronizing?
If your EDGE™ RF glasses from Volfoni are not synchronizing with the ActivHubTM RF50, ensure that the RF channel selected under the ActivHubTM RF is set to position “8”. Also, verify that your original source is broadcasting in 3D.
Why are my Volfoni Edge RF VPEG-03210 blinking strongly?
If your Volfoni 3D glasses are blinking strongly, check that there isn't another source using the same RF channel within a 30-meter range of the ActivHubTM RF.
General| Brand | Volfoni |
|---|---|
| Model | Edge RF VPEG-03210 |
| Category | 3D Glasses |
| Language | English |
Details the EDGE™ RF active 3D glasses technology and its benefits for image quality and comfort.
Illustrates how to attach adjustable arms and lists items included in the EDGE™ RF glasses package.
Outlines the ergonomic design, comfort features, and visual quality of the glasses.
Provides detailed technical data including frequency, refresh rates, contrast, and operating conditions.
Introduces the ActivHub™ RF50 as a transmitter for synchronizing 3D glasses.
Explains ActivHub™ RF connection for IR, VESA, or DLP-Link™ synchronization.
Details how to turn the glasses on and off, and the automatic power-off function.
Describes the 3-position switch and how to check battery level and charging status.
Configures switch positions for 3D modes and Delta Sync settings.
Adjusts dark time for visual quality and enables/disables auto-off based on motion.
Provides solutions for common problems like signal recognition, blinking, and synchronization failures.
Lists essential safety precautions for using 3D glasses, including vision checks and child safety.
Outlines Volfoni's warranty policy and return procedures for the EDGE™ RF glasses.
Provides European Union disposal guidelines and Canadian ICES-003 compliance for the product.
To Next Page
