01-281
Display group number 69: zero compensation
of longitudinal acceleration sensor -G251-
Note:
All functions which could previously be
performed with V.A.G 1551 can now also be
carried out with the tester VAS 5051.
Position vehicle on a flat level surface.
- Connect V.A.G 1551 scan tool and select
(address word 03) brake electronics control
module with ignition switched on; Page 01-
163 .
- Check measured values with help of function 08
"Read measured value block" Page 01-240 ,
Display group number 006.
First perform function 11 "Login procedure"
successfully using V.A.G 1551 scan tool
Page 01-287
Rapid data transfer HELP
Enter address word XX
Indicated on display:
- Press keys 0 and 4. (The function "Initiating
basic setting" is selected with 04).
Ст