CONTROLS
AND EQUIPMENT
Through-loading
facility
Long
pieces of luggage can still be trans-
ported
with
the seat bench installed.
To
do this, the overs of the seat frames
must be removed.
Removal
Grip
in the recess of the cover and pull it out
in the direction of the arrow.
Securing pieces of
luggage
Warning
The
load
must
be
stowed
and se-
cured
in such a way
that
no
items
can slide
forward
in a sudden
braking
manoeuvre
or in an acci-
dent
- Risk of
injury!
Installation
of the cover
Place
the cover at the bottom of the open-
ing and fold it up
until
it engages properly
Moveable
rotating
seat
The moveable rotating seat must be en-
gaged in the seat runners and securely-
locked
facing either in the direction of travel
or opposite the direction of travel (see il-
lustration) when vehicle is in motion.
Warning
When
the
vehicle
is in
motion
the
moveable
rotating
seat
may
only
be used if it is the
driving
posi-
tion
and the
seat
cushion is
folded
down.
It
must
always
be
installed
in the
seat
runners
and secured so
that
it does not
become
a
safety
haz-
ard
when
braking
hard
or in the
case of an
accident.
The
seat
belt
function
also de-
pends
upon
the secure
mounting
of the
seat!
88
SEATS
AND
STOWAGE
CONTROLS
AND
EQUII'MI
Nl
Turning
the
moveable
seat
•
Close
the ashtray, the stowage area and
the drinks/can holder in the passenger com-
partment.
• Set backrest against spring loading
• Fold the table down
until
it engages.
•
Press
the lever on the
front
side of the
seat
to the side and
turn
the seat in the de-
sired direction at the same time.
• The seat will only engage when you re-
lease
the lever and the seat is either facing
in the direction of travel or in the opposite
direction.
Please
read the notes on the driv-
ing position on page 88.
Warning
• For
safety
reasons the
seat
may
only
be
turned
when
the ve-
hicle
is
stationary!
• The
rotating
seat
may not be
used
when
the
vehicle
is in mo-
tion
if it is not in the
driving
posi-
tion.
Moving
the
rotating
seat
• Rotate the seat so
that
it is in the oppo-
site direction to the direction of travel.
• Fold up the seat cushion. The
seal,
cushion
is held up by a gas
strut
in this
posi-
tion.
• Pull bar on seat frame up in the direction
of the arrow and hold it in this position.
• Now push the rotating seat either
for-
wards or backwards in the seat runners.
•
Release
the bar and push the rotating
seat
further
until
it engages securely in the
seat
runners.
• Carefully fold down the seat cushion. You
can
only fold down the cushion if the seat is
properly engaged.
Do not sit
down
on the
seat
cushion
when
it is
folded
up as the
seat
could
otherwise
be
damaged.
Warning
•
There
is a
risk
of crush
injiu
ion
if the
seat
cushion is not
foldtd
down
carefully.
• For
safety
reason!: tlx-
•
ntntlnQ
seat
may
only
bo
miivml
IMII
I<
wards
or
forwards
when
Ilia
</••
hide
is
stationary!
SEATS
AND
STOWAGE
—
To Next Page
Loading...
