Volkswagen Passat ‘97 User Manual

47
Test your knowledge
1. How is the high transverse rigidity of the torsion beam rear axle achieved?
a)
b)
2. The V section of the new torsion beam rear axle is open .
3. The advantages of the new wheel bearing generation are as follows:
a) Minimal wear,
b) The ABS speed sensor rotor is protected,
c) It is self-adjusting,
d) It has to be adjusted using a hexagon nut.
4. On the double wishbone rear axle, the upper wishbone is located
the wheel. As a result of this,
is
achieved.

Volkswagen Passat ‘97 Specifications

General

Brand	Volkswagen
Model	Passat ‘97
Category	Automobile
Language	English