Volt Fat Boy Mini Spotlight - Step 6: Install Lens; Step 7: Adjust Luminaire Direction

6
7
VOLT
®
Fat Boy Mini Spotlight - VAL-2014-X-XXX
INSTALLATION INSTRUCTIONS
813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com
6
813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com
Install Lens
Place the lens and the glare
guard back onto the xture.
Align holes on both of them and
secure with previously removed
set screw. Hand tighten until
snug.
Glare
Guard
Lens
Fixture
Set
Screw
Adjust Luminaire Direction
Loosen the adjustment screw at
the joint and adjust the lumi-
naire to the desired direction.
Once the desired direction is
achieved, tighten the adjustment
screw.
ROTATE
Luminaire
Adjustment
Screw