PACKAGE CONTENTS
PRODUCT DIMENSIONS
INSTALL STAKE
1
A. (1) Fixture Body
Determine the desired location
for mounting the stake mount.
Hammer the stake into the
ground until ange of stake is
ush to grade. To avoid damage
to the stake, place a board on top
of the stake while hammering.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Board
GroundSoil
Stake
813.978.3700 • customersupport@voltlighting.com • www.voltlighting.com
3
4.59”
2.2”
1.0”
To Next Page
Loading...
