3
Installation Guide - NiMH to Lithium
Need Help? Contact Us at (732) 967-9888 EXT: 230
Upgrading the Water Tech
TM
Volt FX-8Li Motor Box
STEP 4: Place the funnel / motor box / pole attachment (currently one
piece) funnel side up, with the pole facing you and extending below the
edge of the table.
STEP 3: Turn the unit over and remove the three (3)
screws holding the opposite shell in place. Separate
shell from unit and place screws to side.
STEP 3a: Remove the lanyard
by cutting it. Dispose of the
lanyard and knob as they are
no longer needed.
To Next Page
Loading...