EasyManua.ls Logo

VOLTCRAFT SEM6000 - Page 23

VOLTCRAFT SEM6000
32 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
Always use the gripping surface to pull a mains plug
out of the product. Never unplug a mains plug from
a mains socket by pulling the cable.
Never overload the product. Note the maximum
permissible connected load in the chapter
“Technical Data”.
Do not connect in series! This can lead to an
overload of the product! There is a risk of re!
Do not operate while covered! At higher connected
loads, the product becomes warm, which can lead
to overheating and potentially a re if covered!
Disconnect the product from the mains socket in
thunderstorms for reasons of safety.
Volt-free only, if unplugged!
Do not use the product if it is damaged. There is
a risk of a life-threatening electric shock! In this
case, dispose of the product in an environmentally
correct manner. Safe operation can no longer be
assumed if:
- the product shows visible signs of damage
- the product does not work at all or works poorly
(leaking smoke or a smell of burning, audible
cracking noises, discolouration to the product
or the adjacent surfaces)
- the product was stored under unfavourable
conditions

Related product manuals