EasyManua.ls Logo

VOLTCRAFT SEM6000 - Handling and Use

VOLTCRAFT SEM6000
32 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
Do not operate the device in environments where
there are high levels of dust, ammable gases,
vapours or solvents. There is a danger of re and
explosion!
The device can warm up during use. Make sure not
to place it on sensitive surfaces.
Do not use this product in hospitals or medical
institutions. Radiowaves may interfere with medical
equipment. The same may also apply to other
areas.
c) Handling and use
Never plug in, unplug or operate the product when
your hands are damp or wet. There is a risk of a life-
threatening electric shock! The same applies for the
load that is plugged into the socket of the product.
Never connect the product to the power supply
immediately after it has been transferred from a
cold room into a warm one (e.g. during transport).
The condensation that forms might destroy the
device. Moreover, there is danger of electric shock!
Allow the product to reach room temperature. Wait
until the condensation has evaporated. This might
take several hours. Only then the product may be
plugged into the mains socket and put into use.

Related product manuals